The evaluation of the structural performance and durability using only measurement data without any baseline data is practical. One measurement data type is the frequency response function (FRF) data set, which does not provide enough information about the health state because of the noise included in the data. Proper orthogonal modes (POMs) extracted from the FRF data in a prescribed frequency range are utilized as an index to recognize the existence of damage. The POMs represent the principal axes of inertia formed by the distribution of data on the modal coordinate curve. This work proposes a damage detection method to trace damage based on the POM energy curvature at the element of the finite element model. The validity of the proposed method is illustrated by a numerical experiment and an experimental test.
Skip Nav Destination
Article navigation
August 2015
Research-Article
Damage Identification Based on the Proper Orthogonal Mode Energy Curvature
Eun-Taik Lee,
Eun-Taik Lee
Department of Architectural Engineering,
e-mail: etlee@cau.ac.kr
Chung-Ang University
,Seoul 156-756
, South Korea
e-mail: etlee@cau.ac.kr
Search for other works by this author on:
Hee-Chang Eun
Hee-Chang Eun
1
Department of Architectural Engineering,
e-mail: heechang@kangwon.ac.kr
Kangwon National University
,Chuncheon, Gangwon-do 200-701
, South Korea
e-mail: heechang@kangwon.ac.kr
1Corresponding author.
Search for other works by this author on:
Eun-Taik Lee
Department of Architectural Engineering,
e-mail: etlee@cau.ac.kr
Chung-Ang University
,Seoul 156-756
, South Korea
e-mail: etlee@cau.ac.kr
Hee-Chang Eun
Department of Architectural Engineering,
e-mail: heechang@kangwon.ac.kr
Kangwon National University
,Chuncheon, Gangwon-do 200-701
, South Korea
e-mail: heechang@kangwon.ac.kr
1Corresponding author.
Contributed by the Technical Committee on Vibration and Sound of ASME for publication in the JOURNAL OF VIBRATION AND ACOUSTICS. Manuscript received July 1, 2014; final manuscript received March 10, 2015; published online April 24, 2015. Assoc. Editor: Jeffrey F. Rhoads.
J. Vib. Acoust. Aug 2015, 137(4): 041018 (8 pages)
Published Online: August 1, 2015
Article history
Received:
July 1, 2014
Revision Received:
March 10, 2015
Online:
April 24, 2015
Citation
Lee, E., and Eun, H. (August 1, 2015). "Damage Identification Based on the Proper Orthogonal Mode Energy Curvature." ASME. J. Vib. Acoust. August 2015; 137(4): 041018. https://doi.org/10.1115/1.4030043
Download citation file:
Get Email Alerts
Cited By
Nonlinear damping amplifier friction bearings
J. Vib. Acoust
Application of Embedded Thermophones Toward Tonal Noise Cancelation in Small-Scale Ducted Fan
J. Vib. Acoust (April 2025)
Related Articles
Predicting Nonlinear Modal Properties by Measuring Free Vibration Responses
J. Comput. Nonlinear Dynam (April,2023)
Panel Flutter Model Identification Using the Minimum Model Error Method on the Forced Response Measurements
J. Vib. Acoust (October,2006)
FNPF Analysis of Stochastic Experimental Fluid-Structure Interaction Systems
J. Offshore Mech. Arct. Eng (February,2007)
Development of Real-Time System Identification to Detect Abnormal Operations in a Gas Turbine Cycle
J. Energy Resour. Technol (July,2020)
Related Proceedings Papers
Related Chapters
Stochastic Resonance and Reverse-Resonance by Trichotomous Noise
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Laboratory Experiments on Traffic Noise Annoyance
Community Noise
Toward More Effective Evaluation and Control of Airport Noise
Community Noise