In linear cascade wind tunnel tests, a high level of pitchwise periodicity is desirable to reproduce the azimuthal periodicity in the stage of an axial compressor or turbine. Transonic tests in a cascade wind tunnel with open jet boundaries have been shown to suffer from spurious waves, reflected at the jet boundary, that compromise the flow periodicity in pitch. This problem can be tackled by placing at this boundary a slotted tailboard with a specific wall void ratio $s$ and pitch angle $α$. The optimal value of the $s-α$ pair depends on the test section geometry and on the tunnel running conditions. An inviscid two-dimensional numerical method has been developed to predict transonic linear cascade flows, with and without a tailboard, and quantify the nonperiodicity in the discharge. This method includes a new computational boundary condition to model the effects of the tailboard slots on the cascade interior flow. This method has been applied to a six-blade turbine nozzle cascade, transonically tested at the University of Leicester. The numerical results identified a specific slotted tailboard geometry, able to minimize the spurious reflected waves and regain some pitchwise flow periodicity. The wind tunnel open jet test section was redesigned accordingly. Pressure measurements at the cascade outlet and synchronous spark schlieren visualization of the test section, with and without the optimized slotted tailboard, have confirmed the gain in pitchwise periodicity predicted by the numerical model.

1.
Goethert
,
B.
, 1961,
Transonic Wind Tunnel Testing
,
Pergamon Press
, Oxford, UK.
2.
Davis
,
J. W.
, 1974, “
Optimization of Wave Cancellation in Variable Porosity Transonic Wind Tunnel Flows
,” NASA Technical Report TR-TN-D-7432, November.
3.
Oldfield
,
M.
,
Kiock
,
R.
,
Holmes
,
A.
, and
Graham
,
C.
, 1981, “
Boundary Layer Studies on Highly Loaded Cascades Using Heated Thin Films and a Traversing Probe
,”
ASME J. Eng. Power
0022-0825,
103
, pp.
237
246
.
4.
Holder
,
D.
, and
North
,
R.
, 1963,
Schlieren Methods
,
Her Majesty’s Stationary Office
, London, UK.
5.
Rona
,
A.
,
Gostelow
,
J. P.
,
Paciorri
,
R.
, and
Geron
,
M.
, 2003, “
Wall Intereference in the Discharge Flow in a Linear Cascade Wind Tunnel
,” Conference Paper 2003-0455, AIAA, January,
41st AIAA Aerospace Sciences Meeting and Exhibit
, Reno, NV.
6.
Rona
,
A.
,
Paciorri
,
R.
, and
Sabetta
,
F.
, 2001, “
Experimental and Numerical Evaluation of Non-Reflecting Porous Tailboards for Transonic Cascade Wind Tunnels
,” Conference Paper ATI-CST-019/01, March, in
Proceedings of 4th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics
.
7.
Rona
,
A.
,
Paciorri
,
R.
,
Geron
,
M.
, and
Ince
,
N.
, 2004, “
Slot Width Augmentation in a Slotted-Wall Transonic Linear Cascade Wind Tunnel
,” Conference Paper 2004-0608, AIAA, January,
42nd AIAA Aerospace Sciences Meeting and Exhibit
, Reno, NV.
8.
Calvert
,
J.
, and
Farrar
,
R.
, 1999,
An Engineering Data Book
,
MacMillan Press
, Houndmills, UK.
9.
Di Mascio
,
A.
, and
Favini
,
B.
, 1991, “
A Two-Step Godunov-Type Scheme for the Euler Equation
,”
Meccanica
0025-6455,
26
, pp.
179
188
.
10.
Roache
,
P.
, 1997, “
Quantification of Uncertainty in Computational Fluid Dynamics
,”
Annu. Rev. Fluid Mech.
0066-4189,
29
, pp.
123
160
.
11.
Paciorri
,
R.
,
Sabetta
,
F.
, and
Rona
,
A.
, 2002, “
Wave Reflection of Porous Walls: Numerical Modelling and Application to Transonic Wind Tunnels
,” Conference Paper 2002-1060, AIAA, January,
40th AIAA Aerospace Sciences Meeting and Exhibit
, Reno, NV.