... 03 2021 18 05 2021 18 05 2021 07 06 2021 non-ferrous metals (Zn–40Al–2Cu–2Si alloy) bearing materials wear behavior sliding friction bearings hardness wear mechanisms The first Zn-based commercial alloys produced in the late 1920s are called ZAMAK 2, 3, 5, and 7...

... and prepared by powder metallurgy, was used as a potential material. Pin-on-disk wear tests were conducted to measure the sliding friction of the Cu–Ni–graphite composite against U75 V steel. The results showed that the friction coefficients gradually decreased when the graphite content in the composite ranged...

... temperature has significant effect on the performance of the braking material. Thereby, the tribological and the mechanical properties of the novel material were found to be temperature sensitive. brake materials sliding wear copper matrix composite dry sliding wear testing sliding friction...

... Under Sliding Friction ,” Tribol. Inter. , 27 , pp. 267 – 272 . 10.1016/0301-679X(94)90006-X 14 Ye , N. , and Komvopoulos , K. , 2003 , “ Three-Dimensional Finite Element Analysis of Elastic-Plastic Layered Media Under Thermomechanical Surface Loading ,” ASME J. Tribo. , 125 , pp...

... sliding mode. Wear was assayed for total protein and amount of superficial zone protein (SZP), a marker of the articular cartilage surface zone believed to be a key boundary lubricant [( 16 17 18 )], removed from the surface during sliding. Friction coefficients and surface roughness of the biomaterials...

... effects are discovered, which are different from traditional macroscopic phenomena. 19 07 2010 25 06 2011 06 10 2011 06 10 2011 adhesion continuum mechanics finite element analysis indentation mechanical contact molecular dynamics method sliding friction surface texture...

... of experiments inverse problems mechanical contact parameter estimation sensor placement sliding friction 11 06 2010 05 05 2011 24 05 2011 28 07 2011 28 07 2011 2011 American Society of Mechanical Engineers ...

... 21 07 2011 cooling copper heat exchangers heat transfer lubrication mechanical contact microchannel flow sliding friction steel wear wear testing bearing design and technology friction sliding tribological systems In addition to providing fluid film lubrication...

...-temperature fluidity, and oxidation stability ( 3 4 7 ). friction ATF antishudder clutches detergents lubricating oils mechanical contact sliding friction steel 30 03 2010 22 12 2010 22 03 2011 22 03 2011 Murakami , Y. , Sprys , J. W. , King...

... with the bainitic and austenitic steels. 06 05 2010 18 12 2010 17 03 2011 17 03 2011 abrasion austenitic steel plastic deformation rails railways sliding friction pearlite bainite austenite ferrite sliding wear adhesion third-body abrasion mild oxidation...

... adhesion carbon steel deep drawing galvanising high-pressure effects lubrication mechanical contact sliding friction 22 03 2010 18 11 2010 21 12 2010 21 12 2010 2011 American Society of Mechanical Engineers ...

... plastic deformation scanning electron microscopy sliding friction surface alloying wear resistance X-ray diffraction zirconium compounds coatings sliding surface treatment wear mechanisms Titanium and titanium alloys have been widely applied in industrial fields...

.../rspa.1957.0214 Lovell , M. R. , Deng , Z. , and Khonsari , M. M. , 2000 , “ Experimental Characterization of Sliding Friction: Crossing From Deformation to Plowing Contact ,” ASME J. Tribol. 0742-4787 , 122 ( 4 ), pp. 856 – 863 . 10.1115/1.1286217 Menezes , P. L...

... sliding friction surface roughness inclined contact angular displacement friction The contact of two solid surfaces plays a significant role in mechanical interface design and has triggered off strong interest among researchers since Hertz presented his smooth spherical contact model...

... to affect the wear response and the frictional heat generation ( 1 2 ). cryogenic wear titanium copper flash temperature abrasion boiling point copper hardness low-temperature techniques machine bearings mechanical contact sliding friction steel thermal conductivity titanium...

... or talc ( 20 21 ). cast iron sliding wear behavior solid lubricants oil lubricant material removal mechanisms cast iron lubricating oils lubrication sliding friction suspensions wear 23 12 2009 16 07 2010 23 09 2010 23 09 2010 It may be mentioned...

.... , and Tonder , K. , 1991 , “ A Dynamic System Model for Lubricated Sliding Wear and Running-In ,” ASME J. Tribol. 0742-4787 , 113 , pp. 499 – 505 . 10.1115/1.2920651 Blau , P. J. , 1987 , “ A Model for Run-In and Other Transitions in Sliding Friction ,” ASME J. Tribol. 0742-4787 , 109...

... experimentally verified. static friction coefficient friction model surface roughness asymmetric height distribution rough surfaces sliding friction stiction surface roughness 20 11 2009 16 03 2010 15 06 2010 The following formulas are used to determine Pearson...

.... , 1981 , “ Friction—The Present State of Our Understanding ,” ASME J. Lubr. Technol. 0022-2305 , 103 , pp. 169 – 179 . Rigney , D. A. , and Hirth , J. P. , 1979 , “ Plastic Deformation and Sliding Friction of Metals ,” Wear 0043-1648 , 53 , pp. 345 – 370 . 10.1016/0043-1648(79...

... iron alloys molybdenum alloys nickel alloys niobium alloys oxidation sliding friction friction wear Inconels abrasion adhesion The term “superalloy” was coined in the early 1940s as a way to describe alloys exhibiting excellent mechanical strength and creep resistance at high...