The submerged semicircular breakwater (SBW) is mainly adopted to prevent beach erosion and to reduce the incident wave energy on its leeside, if it is used in front of a vertical breakwater. In addition, it facilitates the premature wave breaking, which in turn causes the reduction in wave energy. The dynamic pressures and forces exerted on the submerged SBW with 7%, 11%, and 17% of the exposed surface area with perforations on its seaside due to regular waves were measured. The hydrodynamic characteristics such as variations in the dimensionless pressures and forces, reflection and transmission coefficients on the semicircular caisson as a function of scattering parameter for three different water depths are presented and an optimum depth of submergence is arrived. The results on the above stated variables for seaside perforated SBWs are compared with the results of an impermeable SBW to study the effect of perforations.
Skip Nav Destination
e-mail: vsundar@iitm.ac.in
e-mail: rsun@iitm.ac.in
e-mail: grawsun@hotmail.com
Article navigation
August 2010
Technical Briefs
Regular Wave Measurements on a Submerged Semicircular Breakwater
V. Sundar,
V. Sundar
Professor
Department of Ocean Engineering,
e-mail: vsundar@iitm.ac.in
Indian Institute of Technology Madras
, Chennai 600036, India
Search for other works by this author on:
R. Sundaravadivelu,
R. Sundaravadivelu
Professor
Department of Ocean Engineering,
e-mail: rsun@iitm.ac.in
Indian Institute of Technology Madras
, Chennai 600036, India
Search for other works by this author on:
K. U. Graw
K. U. Graw
Professor
Department of Civil Engineering,
e-mail: grawsun@hotmail.com
University of Leipzig
, Leipzig 04109, Germany
Search for other works by this author on:
G. Dhinakaran
Professor
V. Sundar
Professor
Department of Ocean Engineering,
Indian Institute of Technology Madras
, Chennai 600036, Indiae-mail: vsundar@iitm.ac.in
R. Sundaravadivelu
Professor
Department of Ocean Engineering,
Indian Institute of Technology Madras
, Chennai 600036, Indiae-mail: rsun@iitm.ac.in
K. U. Graw
Professor
Department of Civil Engineering,
University of Leipzig
, Leipzig 04109, Germanye-mail: grawsun@hotmail.com
J. Offshore Mech. Arct. Eng. Aug 2010, 132(3): 034501 (6 pages)
Published Online: June 24, 2010
Article history
Received:
July 12, 2008
Revised:
August 21, 2009
Online:
June 24, 2010
Published:
June 24, 2010
Citation
Dhinakaran, G., Sundar, V., Sundaravadivelu, R., and Graw, K. U. (June 24, 2010). "Regular Wave Measurements on a Submerged Semicircular Breakwater." ASME. J. Offshore Mech. Arct. Eng. August 2010; 132(3): 034501. https://doi.org/10.1115/1.4000397
Download citation file:
Get Email Alerts
Numerical Modelling of Fish Cage Structural Responses in Regular and Irregular Waves Using Modified XPBD
J. Offshore Mech. Arct. Eng
Slamming characteristics of a rigid wedge during symmetric and asymmetric water entry
J. Offshore Mech. Arct. Eng
Layout Optimization of Wave Energy Park Based on Multi-Objective Optimization Algorithm
J. Offshore Mech. Arct. Eng
Related Articles
Unexpected or Unknown Phenomena
J. Offshore Mech. Arct. Eng (May,2002)
Comments on Special Issue
J. Offshore Mech. Arct. Eng (May,2002)
JOMAE Special Issue on Ocean Engineering
J. Offshore Mech. Arct. Eng (February,2003)
System Identification of a Coupled Two DOF Moored Floating Body in Random Ocean Waves
J. Offshore Mech. Arct. Eng (August,2006)
Related Chapters
Cooling a Radar’s Electronic Board
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
Application of MIKE21-BW Model in the General Arrangement of a Fish Porjt
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
The MCRT Method for Participating Media
The Monte Carlo Ray-Trace Method in Radiation Heat Transfer and Applied Optics