Various types of orthoses have been designed to enable individuals with Spinal Cord Injury (SCI) to stand and walk; however, all of these orthoses have certain problems. A new type of lower limb orthosis was designed and evaluated while five normal subjects walked. Appropriate types of strain gauges were attached on the lateral bar of the orthosis, near the hip joint, in order to measure the loads transmitted through the orthosis. The force applied on the foot, orthosis, and crutch, and the moment applied on the hip joint complex and orthosis were measured during walking with the orthosis. This study showed that the loads applied on the orthosis differed from that reported in the literature and the pattern of the moment and force transmitted through the orthosis was different from those applied on the anatomical structures. The results of this research can be used to enhance lower limb orthotic design for individuals with SCI.
Skip Nav Destination
e-mail: mohammad.karimi@strath.ac.uk
Article navigation
December 2011
Research Papers
Determination of the Loads Applied on the Anatomy and Orthosis During Ambulation With a New Reciprocal Gait Orthosis
Mohammad Taghi Karimi, PhD
Mohammad Taghi Karimi, PhD
Department of Orthotics and Prosthetics, Rehabilitation Faculty, Musculoskeletal Research Centre,
e-mail: mohammad.karimi@strath.ac.uk
Isfahan University of Medical Sciences
, P.O.B. 81745-164, Isfahan, Iran
Search for other works by this author on:
Mohammad Taghi Karimi, PhD
Department of Orthotics and Prosthetics, Rehabilitation Faculty, Musculoskeletal Research Centre,
Isfahan University of Medical Sciences
, P.O.B. 81745-164, Isfahan, Iran
e-mail: mohammad.karimi@strath.ac.uk
J. Med. Devices. Dec 2011, 5(4): 041003 (5 pages)
Published Online: November 14, 2011
Article history
Received:
February 9, 2011
Accepted:
April 28, 2011
Online:
November 14, 2011
Published:
November 14, 2011
Citation
Karimi, M. T. (November 14, 2011). "Determination of the Loads Applied on the Anatomy and Orthosis During Ambulation With a New Reciprocal Gait Orthosis." ASME. J. Med. Devices. December 2011; 5(4): 041003. https://doi.org/10.1115/1.4005320
Download citation file:
Get Email Alerts
Cited By
Context-Driven Design of a Laparoscopic Instrument Cleaner for Use in Rural Low-Resource Hospitals
J. Med. Devices (March 2025)
Related Articles
The Therapress 1600i: Accelerating Knee Rehabilitation
J. Med. Devices (June,2009)
A Novel Device to Evaluate the Stiffness of Ankle-Foot Orthosis Devices
J Biomech Eng (December,2003)
Can Pelvis Angle be Monitored From Seat Support Forces in Healthy Subjects?
J Biomech Eng (March,2009)
Single Channel Hybrid FES Gait Assist System
J. Med. Devices (June,2009)
Related Chapters
The Effect of Anterior Cruciate Ligament Injury on Tibiofemoral Joint Biomechanics: Under Draw Load
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Introduction
Silver Nanoparticles: Properties, Synthesis Techniques, Characterizations, Antibacterial and Anticancer Studies
Survey on Athletes Burnout in Zhejiang
International Conference on Computer and Computer Intelligence (ICCCI 2011)