Volume 117 Issue 2A | J. Mech. Des. | ASME Digital Collection

Skip Nav Destination

Volume 117, Issue 2A

June 1995

ISSN 1050-0472

EISSN 1528-9001

Research Papers

The Study of Design Research Methodology

Y. Reich

J. Mech. Des. June 1995, 117(2A): 211–214. doi: https://doi.org/10.1115/1.2826124

Abstract

View articletitled, The Study of Design Research Methodology

Open the PDF for in another window

Topics: Design , Research methods

Design and Analysis of Explosively Actuated Valves: The Interaction of the Plunger and the Housing

A. F. Emery, S. Deckers, B. K. Jones

J. Mech. Des. June 1995, 117(2A): 215–220. doi: https://doi.org/10.1115/1.2826125

Abstract

View articletitled, Design and Analysis of Explosively Actuated Valves: The Interaction of the Plunger and the Housing

Open the PDF for in another window

Topics: Design , Valves , Disks , Friction , Stress , Deformation , Engineering simulation , Explosives , Fluid dynamics , Press fits

Design Variation Simulation of Thick-walled Cylinders

R. J. Eggert

J. Mech. Des. June 1995, 117(2A): 221–228. doi: https://doi.org/10.1115/1.2826126

Abstract

View articletitled, Design Variation Simulation of Thick-walled Cylinders

Open the PDF for in another window

Topics: Cylinders , Design , Simulation , Geometry , Materials properties , Stress , Autofrettage , Compressive stress , Deformation , Failure

A Strain-Based Fatigue Reliability Analysis Method

J. D. Baldwin, J. G. Thacker

J. Mech. Des. June 1995, 117(2A): 229–234. doi: https://doi.org/10.1115/1.2826127

Abstract

View articletitled, A Strain-Based Fatigue Reliability Analysis Method

Open the PDF for in another window

Topics: Event history analysis , Fatigue , Cycles , Failure , Reliability , Damage , Fatigue analysis , Fatigue life , Fracture (Materials) , Stochastic processes

Contact Stress Analysis of Spiral Bevel Gears Using Finite Element Analysis

G. D. Bibel, A. Kumar, S. Reddy, R. Handschuh

J. Mech. Des. June 1995, 117(2A): 235–240. doi: https://doi.org/10.1115/1.2826128

Abstract

View articletitled, Contact Stress Analysis of Spiral Bevel Gears Using Finite Element Analysis

Open the PDF for in another window

Topics: Finite element analysis , Spiral bevel gears , Stress analysis (Engineering) , Gears , Boundary-value problems , Finite element methods , Finite element model

An Extended Model for the Analysis of the Dynamic Behavior of Planetary Trains

A. Saada, P. Velex

J. Mech. Des. June 1995, 117(2A): 241–247. doi: https://doi.org/10.1115/1.2826129

Abstract

View articletitled, An Extended Model for the Analysis of the Dynamic Behavior of Planetary Trains

Open the PDF for in another window

Topics: Trains , Gears , Architecture , Bearings , Couplings , Degrees of freedom , Finite element analysis , Helical gears , Stiffness , Traction

Fault Detection of Helicopter Gearboxes Using the Multi-Valued Influence Matrix Method

H. Chin, K. Danai, D. G. Lewicki

J. Mech. Des. June 1995, 117(2A): 248–253. doi: https://doi.org/10.1115/1.2826130

Abstract

View articletitled, Fault Detection of Helicopter Gearboxes Using the Multi-Valued Influence Matrix Method

Open the PDF for in another window

Topics: Flaw detection , Mechanical drives , Errors , Fatigue testing , Vibration measurement

Computerized Design and Generation of Low-Noise Helical Gears with Modified Surface Topology

F. L. Litvin, N. X. Chen, J. Lu, R. F. Handschuh

J. Mech. Des. June 1995, 117(2A): 254–261. doi: https://doi.org/10.1115/1.2826131

Abstract

View articletitled, Computerized Design and Generation of Low-Noise Helical Gears with Modified Surface Topology

Open the PDF for in another window

Topics: Design , Helical gears , Noise (Sound) , Topology , Gears , Bearings , Errors , Error functions , Simulation , Vibration

Computerized Simulation of Transmission Errors and Shift of Bearing Contact for Face-Milled Hypoid Gear Drive

F. L. Litvin, Jui-Sheng Chen, T. M. Sep, Jyh-Chiang Wang

J. Mech. Des. June 1995, 117(2A): 262–268. doi: https://doi.org/10.1115/1.2826133

Abstract

View articletitled, Computerized Simulation of Transmission Errors and Shift of Bearing Contact for Face-Milled Hypoid Gear Drive

Open the PDF for in another window

Topics: Bearings , Errors , Simulation , Spiral bevel gears , Cycles , Error functions , Gear teeth , Machine tools , Mechanical drives

Computational Kinematic Analysis of Higher Pairs with Multiple Contacts

E. Sacks, L. Joskowicz

J. Mech. Des. June 1995, 117(2A): 269–277. doi: https://doi.org/10.1115/1.2826134

Abstract

View articletitled, Computational Kinematic Analysis of Higher Pairs with Multiple Contacts

Open the PDF for in another window

Topics: Kinematic analysis , Degrees of freedom , Computation , Design , Kinematics , Shapes

Kinematic Transformation Matrices for 3D Surface Contact Joints

L. J. Gutkowski, G. L. Kinzel

J. Mech. Des. June 1995, 117(2A): 278–285. doi: https://doi.org/10.1115/1.2826135

Abstract

View articletitled, Kinematic Transformation Matrices for 3D Surface Contact Joints

Open the PDF for in another window

Topics: Kinematics , Kinematic analysis

An Inverse Force Analysis of a Tetrahedral Three-Spring System

P. Dietmaier

J. Mech. Des. June 1995, 117(2A): 286–291. doi: https://doi.org/10.1115/1.2826136

Abstract

View articletitled, An Inverse Force Analysis of a Tetrahedral Three-Spring System

Open the PDF for in another window

Topics: Springs , Equilibrium (Physics) , Stability , Stress

Forward Position Analysis of Two 3-R Robots Manipulating a Planar Linkage Payload

G. R. Pennock, K. G. Mattson

J. Mech. Des. June 1995, 117(2A): 292–297. doi: https://doi.org/10.1115/1.2826137

Abstract

View articletitled, Forward Position Analysis of Two 3-R Robots Manipulating a Planar Linkage Payload

Open the PDF for in another window

Topics: Linkages , Robots , Polynomials , Manufacturing , Degrees of freedom , Kinematics , Circuits

A Synthesis Algorithm for Three-Revolute Manipulators by Using an Algebraic Formulation of Workspace Boundary

M. Ceccarelli

J. Mech. Des. June 1995, 117(2A): 298–302. doi: https://doi.org/10.1115/1.2826138

Abstract

View articletitled, A Synthesis Algorithm for Three-Revolute Manipulators by Using an Algebraic Formulation of Workspace Boundary

Open the PDF for in another window

Topics: Algebra , Algorithms , Manipulators , Chain , Design

Determining Burmester Points from the Analysis of a Planar Platform

A. P. Murray, J. Michael McCarthy

J. Mech. Des. June 1995, 117(2A): 303–306. doi: https://doi.org/10.1115/1.2826139

Abstract

View articletitled, Determining Burmester Points from the Analysis of a Planar Platform

Open the PDF for in another window

Topics: Manufacturing , Poles (Building)

A Simulated Annealing-Based Approach to Three-Dimensional Component Packing

S. Szykman, J. Cagan

J. Mech. Des. June 1995, 117(2A): 308–314. doi: https://doi.org/10.1115/1.2826140

Abstract

View articletitled, A Simulated Annealing-Based Approach to Three-Dimensional Component Packing

Open the PDF for in another window

Topics: Annealing , Packing (Shipments) , Packings (Cushioning) , Simulated annealing , Circuits , Mechanical engineering , Optimization

An Improved Shape Annealing Algorithm For Truss Topology Generation

G. Reddy, J. Cagan

J. Mech. Des. June 1995, 117(2A): 315–321. doi: https://doi.org/10.1115/1.2826141

Abstract

View articletitled, An Improved Shape Annealing Algorithm For Truss Topology Generation

Open the PDF for in another window

Topics: Algorithms , Annealing , Shapes , Topology , Trusses (Building) , Simulated annealing , Buckling , Optimization , Shape optimization , Stress

A New Method for Solving Mixed Sets of Equality and Inequality Constraints

S. H. Mullins, W. W. Charlesworth, D. C. Anderson

J. Mech. Des. June 1995, 117(2A): 322–328. doi: https://doi.org/10.1115/1.2826142

Abstract

View articletitled, A New Method for Solving Mixed Sets of Equality and Inequality Constraints

Open the PDF for in another window

Topics: Engineering design , Jacobian matrices , Kinematics , Newton's method

Computational Geometry for Optimal Workpiece Orientation

K. Haghpassand, J. H. Oliver

J. Mech. Des. June 1995, 117(2A): 329–335. doi: https://doi.org/10.1115/1.2826143

Abstract

View articletitled, Computational Geometry for Optimal Workpiece Orientation

Open the PDF for in another window

Topics: Algorithms , Approximation , Computational geometry , Degrees of freedom , Design , Geometry , Kinematics , Machine tools , Machinery , Milling

Use of the Finite Element Method in the Analysis of Impact-Induced Longitudinal Waves in Constrained Elastic Systems

W. H. Gau, A. A. Shabana

J. Mech. Des. June 1995, 117(2A): 336–342. doi: https://doi.org/10.1115/1.2826144

Abstract

View articletitled, Use of the Finite Element Method in the Analysis of Impact-Induced Longitudinal Waves in Constrained Elastic Systems

Open the PDF for in another window

Topics: Finite element methods , Longitudinal waves , Rods , Disperse systems , Dynamics (Mechanics) , Equations of motion , Finite element analysis , Impulse (Physics) , Momentum , Virtual work principle

Technical Briefs

Fabrication and Analysis of a Novel 3 DOF Parallel Wrist Mechanism

S. K. Agrawal, Glen Desmier, Siyan Li

J. Mech. Des. June 1995, 117(2A): 343–345. doi: https://doi.org/10.1115/1.2826145

Abstract

View articletitled, Fabrication and Analysis of a Novel 3 DOF Parallel Wrist Mechanism

Open the PDF for in another window

Topics: Kinematics , Manufacturing , Rotation

Research Papers

The Study of Design Research Methodology

Design and Analysis of Explosively Actuated Valves: The Interaction of the Plunger and the Housing

Design Variation Simulation of Thick-walled Cylinders

A Strain-Based Fatigue Reliability Analysis Method

Contact Stress Analysis of Spiral Bevel Gears Using Finite Element Analysis

An Extended Model for the Analysis of the Dynamic Behavior of Planetary Trains

Fault Detection of Helicopter Gearboxes Using the Multi-Valued Influence Matrix Method

Computerized Design and Generation of Low-Noise Helical Gears with Modified Surface Topology

Computerized Simulation of Transmission Errors and Shift of Bearing Contact for Face-Milled Hypoid Gear Drive

Computational Kinematic Analysis of Higher Pairs with Multiple Contacts

Kinematic Transformation Matrices for 3D Surface Contact Joints

An Inverse Force Analysis of a Tetrahedral Three-Spring System

Forward Position Analysis of Two 3-R Robots Manipulating a Planar Linkage Payload

A Synthesis Algorithm for Three-Revolute Manipulators by Using an Algebraic Formulation of Workspace Boundary

Determining Burmester Points from the Analysis of a Planar Platform

A Simulated Annealing-Based Approach to Three-Dimensional Component Packing

An Improved Shape Annealing Algorithm For Truss Topology Generation

A New Method for Solving Mixed Sets of Equality and Inequality Constraints

Computational Geometry for Optimal Workpiece Orientation

Use of the Finite Element Method in the Analysis of Impact-Induced Longitudinal Waves in Constrained Elastic Systems

Technical Briefs

Fabrication and Analysis of a Novel 3 DOF Parallel Wrist Mechanism

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only