Abstract

In this study, we propose a high ratio involute gear reducer using the Vernier effect, so-called Vernier drive. Our design consists of a fixed internal gear, a rotating internal gear, and single-profile planetary gears, which are mounted on a carrier and simultaneously mesh with both internal gears. Since the mechanism requires a design beyond the conventional gear meshing principles, a method to modify the tooth profile of the rotating internal gear is introduced and mathematically verified with exact geometric relations. The performance of the Vernier drive is theoretically studied by quasi-static analysis, and the operation is tested with additively manufactured prototypes. The results demonstrate that the Vernier drive is able to cover a wide range of reduction ratios with a simple mechanism.

Issue Section:
Design of Direct Contact Systems
Keywords:
gear design, gear geometry, gear trains
Topics:
Design, Gears, Planetary gears

References

1.
Jung
,
S.
,
Han
,
D.
, and
Chang
,
I.
,
2010
,
Standard Mechanical Design
,
Dong Myeong Publishers
,
Paju, Korea
(in Korean).
2.
Jelaska
,
D.
,
2012
,
Gears and Gear Drives
,
Wiley
,
Hoboken, NJ
.
3.
Radzevich
,
S.
,
2016
,
Dudley’s Handbook of Practical Gear Design and Manufacture
, 3rd ed.,
CRC Press
,
Boca Raton, FL
.
4.
KHK
,
2006
,
Introduction to Gears
, 1st ed.,
Kohara Gear Industry Co.,Ltd.
,
Saitama-ken, Japan
https://www.khkgears.co.jp/, Accessed December 25, 2019.
5.
Crowder
,
R.
,
2019
,
Electric Drives and Electromechanical Systems: Applications and Control
, 2nd ed.,
Butterworth-Heinemann
,
Oxford, UK
.
6.
Norton
,
R.
,
1999
,
An Introduction to the Synthesis and Analysis of Mechanisms and Machines
, 2nd ed.,
McGraw-Hill
,
New York, NY
.
7.
Kahraman
,
A.
,
1994
, “
Planetary Gear Train Dynamics
,”
ASME J. Mech. Des.
,
116
(
3
), pp.
713
–
720
. 10.1115/1.2919441
8.
Salgado
,
D.
, and
Castillo
,
J. D.
,
2005
, “
Selection and Design of Planetary Trains Based on Power Flow Maps
,”
ASME J. Mech. Des.
,
127
(
1
), pp.
120
–
134
. 10.1115/1.1828458
9.
Gao
,
M.
, and
Hu
,
J.
,
2018
, “
Kinematic Analysis of Planetary Gear Trains Based on Topology
,”
ASME J. Mech. Des.
,
140
(
1
), p.
012302
. 10.1115/1.4038072
10.
Nidec-Shimpo
,
2013
,
Co-Axial Shaft Reducers
,
Nidec-Shimpo Co.
,
Kyoto, Japan
, http://www.nidec-shimpo.co.jp/en/dl/ctlg.html Accessed December 4, 2019.
11.
LSIS
,
2018
,
Precision Planetary Gearbox
,
LSIS Co. Ltd.
,
Anyang, Korea
https://www.lsis.com/products/category/Smart_Automation_Solution/Gearbox, Accessed December 4, 2019.
12.
Musser
,
C.
,
1959
, “
Strain Wave Gearing
,”
Washinton DC
, U.S. Patent No. 2,906,143.
13.
Musser
,
C.
,
1960
, “
The Harmonic Drive-Breakthrough in Mechanical Drive Design
,”
Mach. Des.
,
32
(
8
), pp.
160
–
170
.
14.
SBB Tech
,
2017
,
Robo Drive
,
SBB Tech Co., Ltd.
,
Gimpo, Korea
http://www.sbb.co.kr/home/bbs/board.php?bo_table=catalog&wr_id=6, Accessed December 11, 2019.
15.
HD
,
2019
,
General Catalogue: Harmonic Drive Gearing & Motion Control
,
Harmonic Drive LLC.
,
Peabody, MA
https://www.harmonicdrive.net/_hd/content/documents1/general-catalog.pdf, Accessed December 6, 2019.
16.
Dong
,
H.
,
Ting
,
K.
, and
Wang
,
D.
,
2012
, “
Kinematic Fundamentals of Planar Harmonic Drives
,”
ASME J. Mech. Des.
,
133
(
1
), p.
011007
.
17.
Kosse
,
V.
,
1997
, “
Analytical Investigation of the Change in Phase Angle Between the Wave Generator and the Teeth Meshing Zone in High-Torque Mechanical Harmonic Drives
,”
J. Mech. Mach. Theory
,
32
(
5
), pp.
533
–
538
. 10.1016/S0094-114X(96)00072-9
18.
Dong
,
H.
, and
Oh
,
S.
,
2012
, “
Dynamic Simulation of Harmonic Gear Drives Considering Tooth Profiles Parameters Optimization
,”
J. Comput.
,
7
(
6
), pp.
1429
–
1436
.
19.
Li
,
Y.
,
Zhang
,
N.
,
Zhang
,
Y.
, and
Dai
,
B.
,
2019
, “
New Design Method for Flexspline Tooth Profile of Harmonic Drive Considering Deformation
,”
IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA)
,
Tokyo, Japan
,
April
, IEEE, pp.
111
–
115
.
20.
Oh
,
S.
,
Chang
,
S.
, and
Lee
,
D.
,
1997
, “
Improvement of the Dynamic Properties of a Steel-Composite Hybrid Flexspline of a Harmonic Drive
,”
Compos. Struct.
,
38
(
1–4
), pp.
251
–
260
. 10.1016/S0263-8223(97)00060-3
21.
Panaca
,
J.
,
Witkowski
,
W.
, and
Mucha
,
J.
,
2017
, “
Fem Analysis of Stress Distribution in the Hermetic Harmonic Drive Flexspline
,”
Strength Mater.
,
49
(
3
), pp.
388
–
398
. 10.1007/s11223-017-9879-z
22.
Ai
,
X.
,
2011
, “
High Reduction Ratio Electric Hub Drive
,”
Washinton DC
, U.S. Patent No. 7,886,858.
23.
Liang
,
C.
,
2018
, “
Hub Motor
,”
Washinton DC
, U.S. Patent No. 9,855,992.
24.
Garcia
,
P.
,
Crispel
,
S.
,
Verstraten
,
T.
,
Saerens
,
E.
,
Vanderborght
,
B.
, and
Lefeber
,
D.
,
2019
, “
Customizing Planetary Gear Trains for Human Limb Assistance and Replication
,”
MATEC Web Conf.
,
287
(
01014
). 10.1051/matecconf/201928701014
25.
Ferguson
,
J.
,
1764
, “
The Description and Use of a New Machine, Called the Mechanical Paradox; Invented by James Ferguson, F.R.S. London
.”
26.
Goodeve
,
T.
, ed.,
1892
,
The Elements of Mechanism
, 2nd ed.,
Butterworth-Heinemann
,
WA
, Chap.
5
, pp.
100
–
144
.
27.
Shigley
,
J.
,
1969
,
Kinematic Analysis of Mechanisms
, 2nd ed.,
McGraw-Hill
,
New York, NY
.
28.
Morozumi
,
M.
,
1989
,
Theory and Design Calculation Technique for Planetary Gears and Differential Gears
,
Nikkan Kogyo Shimbun, Ltd.
,
Tokyo, Japan
(in Japanese).
29.
Hori
,
K.
,
Hayashi
,
I.
, and
Iwatsuki
,
N.
,
1998
, “
The Ideal Tooth Profiles of Conical-External and -Internal Gears Meshing With Cylindrical-Involute Gears Over the Entire Tooth Width
,”
JSME. Int. J. C-Mech. Syst. Mach. Elem. Manuf.
,
41
(
4
), pp.
901
–
911
. 10.1299/jsmec.41.901
30.
Golenko
,
A.
,
2012
, “
A General Approach to the Equalisation of Partial Contact Ratios in 3k Transmission
,”
Key Eng. Mater.
,
490
, pp.
1
–
7
. www.scientific.net/KEM.490.1
31.
Hsieh
,
L.
, and
Chen
,
T.
,
2012
, “
On the Kinematics and Statics of Planetary Simple Gear Reducers
,”
Adv. Mater. Res.
,
591-593
, pp.
2165
–
2168
. www.scientific.net/AMR.591-593.2165
32.
Chang
,
J.
, and
Chang
,
I.
,
2019
, “
Differential Reducer With High Ratio
,” Korea, Korea Patent Application No. 10-2019-0144975.
33.
Schmidt
,
R.
,
Schitter
,
G.
, and
Rankers
,
A.
, eds.,
2014
,
The Design of High Performance Mechatronics
, 2nd ed.,
IOS Press
,
Amsterdam, Netherlands
, Chap.
8
, pp.
537
–
685
.
Copyright © 2020 by ASME
You do not currently have access to this content.