Skip Nav Destination
Issues
October 2001
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Foreword
J. Eng. Mater. Technol. October 2001, 123(4): 377.
doi: https://doi.org/10.1115/1.1394201
Topics:
Finite element analysis
,
Metallurgy
,
Metalworking
,
Design
Technical Papers
Nonlinear Kinematic Hardening Identification for Anisotropic Sheet Metals With Bending-Unbending Tests
J. Eng. Mater. Technol. October 2001, 123(4): 378–383.
doi: https://doi.org/10.1115/1.1394202
Topics:
Anisotropy
,
Hardening
,
Kinematics
,
Sheet metal
,
Stress
,
Plasticity
,
Strips
Stress and Strain Histories of Multiple Bending-Unbending Springback Process
J. Eng. Mater. Technol. October 2001, 123(4): 384–390.
doi: https://doi.org/10.1115/1.1395574
Topics:
Hardening
,
Kinematics
,
Stress
,
Shells
,
Simulation
Generation of Cyclic Stress-Strain Curves for Sheet Metals
J. Eng. Mater. Technol. October 2001, 123(4): 391–397.
doi: https://doi.org/10.1115/1.1395021
Topics:
Genetic algorithms
,
Hardening
,
Kinematics
,
Optimization
,
Sheet metal
,
Stress
,
Stress-strain curves
,
Steel
,
Plasticity
,
Anisotropy
Application of the Radial Return Method to Compute Stress Increments From Mroz’s Hardening Rule
J. Eng. Mater. Technol. October 2001, 123(4): 398–402.
doi: https://doi.org/10.1115/1.1395022
Topics:
Hardening
,
Stress
,
Anisotropy
Viscoplastic Constitutive Modeling of Anisotropic Damage Under Nonproportional Loading
J. Eng. Mater. Technol. October 2001, 123(4): 403–408.
doi: https://doi.org/10.1115/1.1395575
Topics:
Damage
,
Forming limit diagrams
,
Anisotropy
,
Modeling
,
Necking
Modified Anisotropic Gurson Yield Criterion for Porous Ductile Sheet Metals
J. Eng. Mater. Technol. October 2001, 123(4): 409–416.
doi: https://doi.org/10.1115/1.1395023
Topics:
Anisotropy
,
Finite element analysis
,
Sheet metal
,
Work hardening
,
Stress
,
Porous materials
,
Computation
,
Fittings
Stress-Based Forming Limits in Sheet-Metal Forming
J. Eng. Mater. Technol. October 2001, 123(4): 417–422.
doi: https://doi.org/10.1115/1.1398083
Topics:
Forming limit diagrams
,
Stress
,
Stress-strain relations
,
Sheet metal work
Failure Analysis of Tubular Hydroforming
J. Eng. Mater. Technol. October 2001, 123(4): 423–429.
doi: https://doi.org/10.1115/1.1394966
Topics:
Anisotropy
,
Deformation
,
Failure
,
Failure analysis
,
Mathematical analysis
,
Plasticity
,
Pressure
,
Stress
Wrinkling Limit in Tube Bending
J. Eng. Mater. Technol. October 2001, 123(4): 430–435.
doi: https://doi.org/10.1115/1.1395018
Topics:
Buckling
,
Materials properties
,
Tube bending
,
Stress
,
Stainless steel
,
Geometry
,
Deformation
,
Aerospace industry
A Study on Fundamental Mechanisms of Warp and Recoil in Hemming
J. Eng. Mater. Technol. October 2001, 123(4): 436–441.
doi: https://doi.org/10.1115/1.1396348
Topics:
Warping
,
Finite element analysis
The Effects of Tooling Imperfections on the Initiation of Wrinkling in Finite Element Modeling of a Deep Drawing Process
J. Eng. Mater. Technol. October 2001, 123(4): 442–446.
doi: https://doi.org/10.1115/1.1396351
Topics:
Blanks
,
Finite element analysis
,
Modeling
,
Tooling
,
Displacement
,
Finite element model
Effects of Some Modeling Parameters of Finite Element Models of Binder Forming
J. Eng. Mater. Technol. October 2001, 123(4): 447–455.
doi: https://doi.org/10.1115/1.1395578
Topics:
Binders (Materials)
,
Blanks
,
Damping
,
Finite element analysis
,
Modeling
,
Shapes
,
Simulation
,
Oscillations
,
Errors
,
Simulation results
Effective Models for Prediction of Springback In Flanging
Nan Song, Research Assistant, Dong Qian, Research Assistant, Jian Cao, Assistant Professor, Wing Kam Liu, Professor, Shaofan Li, Assistant Professor
J. Eng. Mater. Technol. October 2001, 123(4): 456–461.
doi: https://doi.org/10.1115/1.1395019
Efficient Meshfree Formulation for Metal Forming Simulations
Sangpil Yoon, Graduate Student, Cheng-Tang Wu, Research Associate, Hui-Ping Wang, Graduate Student, Jiun-Shyan Chen, Associate Professor
J. Eng. Mater. Technol. October 2001, 123(4): 462–467.
doi: https://doi.org/10.1115/1.1396349
Topics:
Galerkin method
,
Meshfree methods
,
Metalworking
,
Shapes
,
Simulation
,
Stiffness
,
Deformation
,
Elastoplasticity
,
Dimensions
,
Metallurgy
Optimal Blank Design for the Drawings of Arbitrary Shapes by the Sensitivity Method
J. Eng. Mater. Technol. October 2001, 123(4): 468–475.
doi: https://doi.org/10.1115/1.1398082
Topics:
Blanks
,
Deformation
,
Design
,
Shapes
,
Engineering drawings
,
Flanges
Optimum Process Design in Sheet-Metal Forming With Finite Element Analysis
J. Eng. Mater. Technol. October 2001, 123(4): 476–481.
doi: https://doi.org/10.1115/1.1395579
Topics:
Blanks
,
Design
,
Finite element analysis
,
Optimization
,
Sheet metal work
,
Shapes
,
Algorithms
,
Response surface methodology
,
Process design
Stamping Blank Optimal Layout and Coil Slitting Widths for Single and Multiple Blanks
J. Eng. Mater. Technol. October 2001, 123(4): 482–488.
doi: https://doi.org/10.1115/1.1395020
Topics:
Blanks
,
Strips
,
Metal stamping
,
Algorithms
,
Raw materials
A Finite Element Based Die Design Algorithm for Sheet-Metal Forming on Reconfigurable Tools
J. Eng. Mater. Technol. October 2001, 123(4): 489–495.
doi: https://doi.org/10.1115/1.1395576
Topics:
Algorithms
,
Design
,
Finite element analysis
,
Geometry
,
Pins (Engineering)
,
Pressure
,
Shapes
,
Sheet metal
,
Sheet metal work
,
Springs
In Process Control of Strain in a Stretch Forming Process
J. Eng. Mater. Technol. October 2001, 123(4): 496–503.
doi: https://doi.org/10.1115/1.1397780
Topics:
Displacement
,
Force control
,
Machinery
,
Stress
,
Work hardening
,
Shapes
,
Process control
,
Deformation
,
Modeling
,
Feedback
Improving Formability in Sheet Metal Stamping With Active Drawbead Technology
J. Eng. Mater. Technol. October 2001, 123(4): 504–510.
doi: https://doi.org/10.1115/1.1395577
Real-Time Process Characterization of Open Die Forging for Adaptive Control
J. Eng. Mater. Technol. October 2001, 123(4): 511–516.
doi: https://doi.org/10.1115/1.1396350
Topics:
Forging
,
Manipulators
,
Elongation
,
Adaptive control
,
Deformation
Superimposing Ultrasonic Waves on the Dies in Tube and Wire Drawing
J. Eng. Mater. Technol. October 2001, 123(4): 517–523.
doi: https://doi.org/10.1115/1.1397779
Topics:
Friction
,
Lubricants
,
Sliding friction
,
Ultrasonic waves
,
Vibration
,
Wire
,
Wire drawing
,
Oscillations
,
Mineral oil
,
Viscosity
Spatial Free Plastic Forming of Slender Parts—Machine Design, Forming Limits, and Application
J. Eng. Mater. Technol. October 2001, 123(4): 524–529.
doi: https://doi.org/10.1115/1.1397374
Email alerts
RSS Feeds
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)