Because of the increasing demand in industry for A/B-axis tool heads, particularly in thin wall machining applications for structural aluminium aerospace components, the three-degree-of-freedom articulated tool head with parallel kinematics has become very popular. This paper addresses the dimensional optimization of two types of tool head with 3-P̱VPHS and 3-P̱VRS parallel kinematics (P, R, and S standing for prismatic, revolute, and spherical joint, respectively; the subscripts V and H indicating that the direction of the P joint is vertical or horizontal, and the joint symbol with underline means the joint is active) by considering their orientation capability and positioning accuracy. We first investigate the tilt angle of the spherical joint, the orientation capability, and the error of one point from the mobile platform caused by input errors. Optimization of the 3-P̱VPHS tool head is easy. For the 3-P̱VRS tool head, a design space is developed to illustrate how the orientation capability and error index are related to the link lengths. An optimization process is accordingly presented. Using the optimization method introduced here, it is not difficult to find all the possible optimal solutions.

1.
Wahl
,
J.
, 2000, “
Articulated Tool Head
,” WIPO Patent No. WO 00/25976.
2.
Fernandez
,
A. J. S.
,
Jimenez
,
V. C.
, and
Olazabal
,
M. G.
, 2002, “
Kinematical System for a Movable Platform of a Machine
,” European Patent No. EP1245349(A1).
3.
Bonev
,
I. A.
, 2002, “
Geometric Analysis of Parallel Mechanisms
,” Ph.D. thesis, Laval University, Quebec.
4.
Lee
,
K.-M.
, and
Shah
,
D. K.
, 1988, “
Kinematic Analysis of a Three-Degree-of-Freedom in-Parallel Actuated Manipulator
,”
IEEE J. Rob. Autom.
0882-4967
4
(
3
), pp.
354
360
.
5.
Carretero
,
J. A.
,
Nahon
,
M. A.
, and
Podhorodeski
,
R.
, 2000, “
Workspace Analysis and Optimization of a Novel 3-DOF Parallel Manipulator
,”
IEEE Trans. Rob. Autom.
1042-296X,
15
(
4
), pp.
178
188
.
6.
Pond
,
G. T.
, and
Carretero
,
J. A.
, 2004, “
Kinematic Analysis and Workspace Determination of the Inclined PRS Parallel Manipulator
,”
Proc. of 15th CISM-IFToMM Symposium on Robot Design, Dynamics, and Control
,
Paper No. Rom04-18, Montreal.
7.
Liu
,
X.-J.
,
Pruschek
,
P.
, and
Pritschow
,
G.
, 2004, “
A New 3-DOF Parallel Mechanism With Full Symmetrical Structure and Parasitic Motions
,”
Proc. of International Conf. on Intelligent Manipulation and Grasping
,
Genoa, Italy, June, pp.
389
394
.
8.
Gosselin
,
C.
, and
Angeles
,
J.
, 1989 “
The Optimum Kinematic Design of a Spherical Three-Degree-of-Freedom Parallel Manipulator
,”
ASME J. Mech., Transm., Autom. Des.
0738-0666,
111
(
2
), pp.
202
207
.
9.
Ottaviano
,
E.
, and
Ceccarelli
,
M.
, 2002, “
Optimal Design of CaPaMan (Cassino Parallel Manipulator) With a Specified Orientation Workspace
,”
Robotica
0263-5747,
20
, pp.
159
166
.
10.
Chablat
,
D.
, and
Wenger
,
P.
, 2003, “
Architecture Optimization of a 3-DOF Parallel Mechanism for Machining Applications: The Orthoglide
,”
IEEE Trans. Rob. Autom.
1042-296X,
19
(
3
), pp.
403
410
.
11.
Liu
,
X.-J.
,
Wang
,
J.
, and
Kim
,
J.
, 2006, “
Determination of the Link Lengths for a Spatial 3-DoF Parallel Manipulator
,”
ASME J. Mech. Des.
1050-0472,
128
, pp.
365
373
.
12.
Merlet
,
J. P.
, 2006, ‘
Jacobian, Manipulability, Condition Number, and Accuracy of Parallel Robots
,”
ASME J. Mech. Des.
1050-0472,
128
, pp.
199
206
.
13.
Gosselin
,
C.
, and
Angeles
,
J.
, 1991, “
A Global Performance Index for the Kinematic Optimization of Robotic Manipulators
,”
ASME J. Mech. Des.
1050-0472,
113
, pp.
220
226
.
14.
Liu
,
X.-J.
,
Wang
,
J.
, and
Pritschow
,
G.
, 2006, “
Kinematics, Singularity and Workspace of Planar 5R Symmetrical Parallel Mechanisms
,”
Mech. Mach. Theory
0094-114X
41
(
2
), pp.
145
169
.
You do not currently have access to this content.