An apparatus for the measurement of the total hemispherical emittance and specific heat of metals has been developed. The measurement principle is based on the calorimetric technique: the sample, heated by Joule effect and placed in a vacuum chamber, exchanges radiative heat transfer with the walls of the container, kept at a relatively low temperature. Emittance is deduced from the radiative heat transfer laws at the steady state. When the heating power is switched off, the specific heat of the sample can be recovered from the time history of the sample temperature during the cooling transient. Measurements have been performed on samples of aluminum Anticorodal alloy and Inconel 718 alloy under different surface conditions in the range.
1.
Sasaki
, S.
, Masuda
, H.
, Higano
, M.
, and Hishinuma
, N.
, 1994, “Simulataneous Measurements of Specific Heat and Total Hemispherical Emissivity of Chromel and Alumel by a Transient Calorimetric Technique
,” Int. J. Thermophys.
0195-928X, 15
, pp. 547
–565
.2.
Cheng
, S. X.
, 1984, “An Accurate Transient Calorimeter for Measuring the Total Hemispherical Emissivity of Metals and Alloys
,” High Temp. - High Press.
0018-1544, 16
, pp. 459
–468
.3.
Masuda
, H.
, and Higano
, M.
, 1985, “Transient Calorimetric Technique for Measuring Total Hemispherical Emissivities of Metals with Rigorous Evaluation of Heat Loss Through Thermocouple Leads
,” J. Opt. Soc. Am. A
0740-3232, 2
, pp. 1877
–1882
.4.
Masuda
, H.
, and Higano
, M.
, 1988, “Measurement of Total Hemispherical Emissivities of Metal Wires by Using Transient Calorimetric Technique
,” ASME J. Heat Transfer
0022-1481, 110
, pp. 166
–172
.5.
Greene
, G. A.
, Finfrock
, C. C.
, and Irvine
Jr., T. F.
, 2000, “Total Hemispherical Emissivity of Oxidized Inconel 718 in the Temperature Range 300-1000°C
,” Exp. Therm. Fluid Sci.
0894-1777, 22
, pp. 145
–153
.6.
Moffat
, R. J.
, 1988, “Describing the Uncertainties in Experimental Results
,” Exp. Therm. Fluid Sci.
0894-1777, 1
, pp. 3
–7
.7.
Ramanathan
, K. G.
, and Yen
, S. H.
, 1977, “High-Temperature Emissivities of Copper, Aluminum, and Silver
,” J. Opt. Soc. Am. A
0740-3232, 67
, pp. 32
–38
.8.
Misale
, M.
, Pisoni
, C.
, and Tanda
, G.
, 1988, “Influence of Surface Finishing Operation on Total Normal Emittance of Nickel and Titanium
,” Int. J. Heat Technol.
0392-8764, 6
, pp. 97
–110
.9.
Misale
, M.
, Pisoni
, C.
, and Tanda
, G.
, 1989, “Investigation of Total Emittance of Metals and Steels Subjected to Mechanical Surface Treatments
,” High Temp. - High Press.
0018-1544, 21
, pp. 311
–315
.10.
Weaver
, J. H.
, 1963, “Anodized Aluminum Coatings for Temperature Control of Space Vehicles
,” Air Force Systems Command, Technical Documentary Report No. ASD-TDR-62-918.11.
Brannon
Jr., R. R.
, and Goldstein
, R. J.
, 1970, “Emittance of Oxide Layers on a Metal Substrate
,” ASME J. Heat Transfer
0022-1481, 92
, pp. 257
–263
.Copyright © 2006
by American Society of Mechanical Engineers
You do not currently have access to this content.