... flow for the pebble bed in the structure of the face centered cubic. The wind tunnel was designed to provide the same Reynolds number of 2.1614 × 10 4 as the pebble bed nuclear reactor. Scaling law determined the diameter of the pebble as 120 mm, which is two times bigger than the reference when we use...

... in the wind tunnel Fog nozzles manifold A nozzle manifold, installed at the inlet of the duct, was turned off when measurements were taken at ambient conditions. For measurements with a saturated airflow, these nozzles were turned on, Fig. 4 , and a fog droplet...

... with practical aspects learned in the implementation of nearly 500 inlet fogging systems on gas turbines ranging in power from 5 to 250 MW. In Part III of this paper, the complex behavior of fog droplets in the inlet duct is addressed and experimental results from several wind tunnel studies are covered...

... using any of a number of techniques. These include wind tunnel tests, direct-connect tests, freejet tests, and flight tests. The choice of technique depends on such factors as the size of the vehicle, cost, and stage of development. Each technique employs a method of subjecting the compression system...