A series of experimental investigations on the studies related to fluid flow and transient mixed convection from a horizontally unconfined stationary or rotating ceramic-based multichip module (MCM) disk with unconfined jet impingement have been successfully conducted. The fluid flow and heat transfer behavior explored includes the streamwise velocity and turbulence intensity distributions, transient dimensionless temperature distribution on the MCM disk surface, transient heat flux distribution of input power, and transient chip and average heat transfer characteristics on the MCM disk surface. Besides, two new correlations of transient stagnation and average Nusselt numbers in terms of jet Reynolds number, ratio of jet separation distance to nozzle diameter and time elapsed during the transient period, are presented for the cases of stationary MCM disk. For the cases of rotating MCM disk, a complete composite correlation of steady-state average Nusselt number for mixed convection due to jet impingement, disk rotation and buoyancy is proposed. As compared with the steady-state results, if the transient chip and average heat transfer behaviors may be considered as a superposition of a series of quasisteady states, the transient chip and average Nusselt numbers in all the present transient experiments can be properly predicted by the existing steady-state correlations when $t>6min$ in the power-on transient period.

1.
Gardon
,
R.
, and
Conbonpue
,
J.
, 1962, “
Heat Transfer Between a Flat Plate and Jets of Air Impingement on it
,” in
Internal Development in Heat Transfer, ASME
, pp.
454
460
.
2.
Martin
,
H.
, 1977, “
Heat and Mass Transfer Between Impinging Gas Jet and Solid Surface
,” in
Advances in Heat Transfer
,
Hartnett
,
J. P.
, and
Irvine
, Jr.,
T. F.
, eds.,
,
New York
, Vol.
13
, pp.
1
60
.
3.
Jambunathan
,
K.
,
Lai
,
E.
,
Moss
,
M. A.
, and
Button
,
B. L.
, 1992, “
A Review of Heat Transfer Data for Single Circular Jet Impingement
,”
Int. J. Heat Fluid Flow
0142-727X,
13
, pp.
106
115
.
4.
Brodersen
,
S.
, and
Metzger
,
D.
, 1992, “
Experimental Investigation of the Flowfield Resulting From the Interaction Between an Impinging Jet and a Rotating Disk
,”
Exp. Therm. Fluid Sci.
0894-1777,
5
, pp.
351
358
.
5.
Liu
,
L. K.
,
Su
,
W. S.
, and
Hung
,
Y. H.
, 2004, “
Transient Convective Heat Transfer of Air Jet Impinging Onto a Confined Ceramic Based MCM Disk
,”
ASME J. Electron. Packag.
1043-7398,
126
, pp.
159
172
.
6.
Hung
,
Y. H.
, and
Perng
,
S. W.
, 1988, “
An Experimental Technique for Measuring Transient Natural/Forced-Convective Heat Fluxes in a Vertical Channel
,”
Exp. Therm. Fluid Sci.
0894-1777,
1
, pp.
305
313
.
7.
Hung
,
Y. H.
, and
Shiau
,
W. M.
, 1989, “
An Effective Model for Measuring Transient Natural Convection Heat Flux in Vertical Parallel Plates With a Rectangular Rib
,”
Int. J. Heat Mass Transfer
0017-9310,
32
, pp.
863
871
.
8.
Lin
,
H. H.
, and
Hung
,
Y. H.
, 1993, “
Transient Forced Convection Heat Transfer in a Vertical Rib-Heated Channel Using a Turbulence Promoter
,”
Int. J. Heat Mass Transfer
0017-9310,
36
, pp.
1553
1571
.
9.
Kline
,
S. J.
, and
McClintock
,
F. A.
, 1953, “
Describing Uncertainties in Single-Sample Experiments
,”
Mech. Eng. (Am. Soc. Mech. Eng.)
0025-6501,
75
, pp.
3
8
.
10.
Moffat
,
R. J.
, 1986, “
Contributions to the Theory of Single-Sample Uncertainty Analysis
,”
ASME J. Fluids Eng.
0098-2202,
104
, pp.
250
260
.
11.
Ellison
,
B.
, and
Webb
,
B. W.
, 1994, “
Local Heat Transfer to Impinging Liquid Jets in the Initially Laminar, Transitional, and Turbulent Regimes
,”
Int. J. Heat Mass Transfer
0017-9310,
37
, pp.
1207
1216
.
12.
Wygnanski
,
I. J.
, and
Champagne
,
F. H.
, 1973, “
On Transition in a Pipe. Part 1. The Origin of Puffs and Slugs and the Flow in a Turbulent Slug
,”
J. Fluid Mech.
0022-1120,
59
, pp.
281
335
.
You do not currently have access to this content.