Abstract
An approach to infer mechanical properties of shape memory alloys (SMAs) from instrumented spherical indentation records of indenter tip loading force, , versus the resultant indentation depth, , during indentation loading and unloading is proposed. The approach is based on (i) a finite element (FE) model for describing the forward problem of determining the indentation response, i.e., the curve, for a given set of SMA mechanical properties, (ii) a computationally efficient Gaussian process surrogate model to replace the costly FE one, and (iii) an iterative solution strategy, which approximates the unknown model parameters from an experimentally determined record and their corresponding probability densities via a Bayesian inference framework and a Markov Chain Monte Carlo sampling strategy. The efficacy of the proposed approach is demonstrated using numerical experiments, i.e., indentation curves generated by evaluating the FE model at points in the parameter space.
References
1.
Ozbulut
, O. E.
, Hurlebaus
, S.
, and Desroches
, R.
, 2011
, “Seismic Response Control Using Shape Memory Alloys: A Review
,” J. Intell. Mater. Syst. Struct.
, 22
(14
), pp. 1531
–1549
. 2.
Mohd Jani
, J.
, Leary
, M.
, Subic
, A.
, and Gibson
, M. A.
, 2014
, “A Review of Shape Memory Alloy Research, Applications and Opportunities
,” Mater. Des.
, 56
, pp. 1078
–1113
. 3.
Barbarino
, S.
, Saavedra Flores
, E. L.
, Ajaj
, R. M.
, Dayyani
, I.
, and Friswell
, M. I.
, 2014
, “A Review on Shape Memory Alloys With Applications to Morphing Aircraft
,” Smart Mater. Struct.
, 23
(6
), p. 63001
. 4.
Sreekumar
, M.
, Nagarajan
, T.
, Singaperumal
, M.
, Zoppi
, M.
, and Molfino
, R.
, 2007
, “Critical Review of Current Trends in Shape Memory Alloy Actuators for Intelligent Robots
,” Indus. Rob.
, 34
(4
), pp. 285
–294
. 5.
Costanza
, G.
, and Tata
, M. E.
, 2020
, “Shape Memory Alloys for Aerospace, Recent Developments, and New Applications: A Short Review
,” Materials
, 13
(8
), p. 1856
. 6.
Bellouard
, Y.
, 2008
, “Shape Memory Alloys for Microsystems: A Review From a Material Research Perspective
,” Mater. Sci. Eng. A
, 481–482
(1–2 C1
), pp. 582
–589
. 7.
Mehrpouya
, M.
, and Bidsorkhi
, H. C.
, 2016
, “MEMS Applications of Niti Based Shape Memory Alloys: A Review
,” Micro Nanosyst.
, 8
(2
), pp. 79
–91
. 8.
Choudhary
, N.
, and Kaur
, D.
, 2016
, “Shape Memory Alloy Thin Films and Heterostructures for Mems Applications: A Review
,” Sens. Actuat. A
, 242
, pp. 162
–181
. 9.
Nespoli
, A.
, Besseghini
, S.
, Pittaccio
, S.
, Villa
, E.
, and Viscuso
, S.
, 2010
, “The High Potential of Shape Memory Alloys in Developing Miniature Mechanical Devices: A Review on Shape Memory Alloy Mini-actuators
,” Sens. Actuat. A.
, 158
(1
), pp. 149
–160
. 10.
Khoo
, Z. X.
, Liu
, Y.
, An
, J.
, Chua
, C. K.
, Shen
, Y. F.
, and Kuo
, C. N.
, 2018
, “A Review of Selective Laser Melted Niti Shape Memory Alloy
,” Materials
, 11
(4
), p. 519
. 11.
Safaei
, K.
, Abedi
, H.
, Nematollahi
, M.
, Kordizadeh
, F.
, Dabbaghi
, H.
, Bayati
, P.
, Javanbakht
, R.
, Jahadakbar
, A.
, Elahinia
, M.
, and Poorganji
, B.
, 2021
, “Additive Manufacturing of Niti Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem
,” J. Miner., Metals Mater. Soc.
, 73
(12
), pp. 3771
–3786
. 12.
Cheng
, Y. T.
, and Cheng
, C. M.
, 1998
, “Relationships Between Hardness, Elastic Modulus, and the Work of Indentation
,” Appl. Phys. Lett.
, 73
(5
), pp. 614
–616
. 13.
Gouldstone
, A.
, Chollacoop
, N.
, Dao
, M.
, Li
, J.
, Minor
, A. M.
, and Shen
, Y. L.
, 2007
, “Indentation Across Size Scales and Disciplines: Recent Developments in Experimentation and Modeling
,” Acta Mater.
, 55
(12
), pp. 4015
–4039
. 14.
Oliver
, W. C.
, and Pharr
, G. M.
, 1992
, “An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments
,” J. Mater. Res.
, 7
(6
), pp. 1564
–1583
. 15.
Giannakopoulos
, A. E.
, and Suresh
, S.
, 1999
, “Determination of Elastoplastic Properties by Instrumented Sharp Indentation
,” Scr. Mater.
, 40
(10
), pp. 1191
–1198
. 16.
Dao
, M.
, Chollacoop
, N.
, Van Vliet
, K. J.
, Venkatesh
, T. A.
, and Suresh
, S.
, 2001
, “Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation
,” Acta Mater.
, 49
(19
), pp. 3899
–3918
. 17.
Patel
, D. K.
, and Kalidindi
, S. R.
, 2017
, “Estimating the Slip Resistance From Spherical Nanoindentation and Orientation Measurements in Polycrystalline Samples of Cubic Metals
,” Int. J. Plast.
, 92
, pp. 19
–30
. 18.
Fernandez-Zelaia
, P.
, Joseph
, V. R.
, Kalidindi
, S. R.
, and Melkote
, S. N.
, 2018
, “Estimating Mechanical Properties From Spherical Indentation Using Bayesian Approaches
,” Mater. Des.
, 147
, pp. 92
–105
. 19.
Patel
, D. K.
, Al-Harbi
, H. F.
, and Kalidindi
, S. R.
, 2014
, “Extracting Single-Crystal Elastic Constants From Polycrystalline Samples Using Spherical Nanoindentation and Orientation Measurements
,” Acta Mater.
, 79
, pp. 108
–116
. 20.
Chen
, X.
, Jiang
, W.
, Lu
, S.
, Zhao
, S.
, Ma
, Y.
, Hu
, H.
, Fu
, T.
, and Peng
, X.
, 2023
, “Effect of Material Parameters on the Indentation Mechanical Behavior of Superelastic Niti Shape Memory Alloy
,” J. Mater. Eng. Perform.
, 33
(5
), pp. 1
–16
. 21.
Ma
, X. G.
, and Komvopoulos
, K.
, 2003
, “Nanoscale Pseudoelastic Behavior of Indented Titanium–nickel Films
,” Appl. Phys. Lett.
, 83
(18
), pp. 3773
–3775
. 22.
Pfetzing-Micklich
, J.
, Wieczorek
, N.
, Simon
, T.
, Maaß
, B.
, and Eggeler
, G.
, 2014
, “Direct Microstructural Evidence for the Stress Induced Formation of Martensite During Nanonindentation of Niti
,” Mater. Sci. Eng. A
, 591
, pp. 33
–37
. 23.
Laplanche
, G.
, Pfetzing-Micklich
, J.
, and Eggeler
, G.
, 2014
, “Sudden Stress-Induced Transformation Events During Nanoindentation of Niti Shape Memory Alloys
,” Acta Mater.
, 78
, pp. 144
–160
. 24.
Amini
, A.
, Yan
, W.
, and Sun
, Q.
, 2011
, “Depth Dependency of Indentation Hardness During Solid-State Phase Transition of Shape Memory Alloys
,” Appl. Phys. Lett.
, 99
(2
), p. 021901
. 25.
Gall
, K.
, Juntunen
, K.
, Maier
, H. J.
, Sehitoglu
, H.
, and Chumlyakov
, Y. I.
, 2001
, “Instrumented Micro-Indentation of Niti Shape-Memory Alloys
,” Acta Mater.
, 49
(16
), pp. 3205
–3217
. 26.
Cheng
, F. T.
, Shi
, P.
, and Man
, H. C.
, 2001
, “Correlation of Cavitation Erosion Resistance With Indentation-Derived Properties for a Niti Alloy
,” Scr. Mater.
, 45
(9
), pp. 1083
–1089
. 27.
Dhala
, S.
, Mishra
, S.
, Tewari
, A.
, and Alankar
, A.
, 2019
, “Analyses of Orientation Dependent Nanoindentation Response of Pseudoelastic Niti Alloy Using a Crystal Plasticity Model
,” Mech. Mater.
, 135
, pp. 1
–12
. 28.
Kang
, G.
, and Yan
, W.
, 2009
, “Effects of Phase Transition on the Hardness of Shape Memory Alloys
,” Appl. Phys. Lett.
, 94
(26
), p. 261906
. 29.
Kan
, Q.
, Yan
, W.
, Kang
, G.
, and Sun
, Q.
, 2013
, “Oliver-Pharr Indentation Method in Determining Elastic Moduli of Shape Memory Alloys-A Phase Transformable Material
,” J. Mech. Phys. Solids
, 61
(10
), pp. 2015
–2033
. 30.
Allmaras
, M.
, Bangerth
, W.
, Linhart
, J. M.
, Polanco
, J.
, Wang
, F.
, Wang
, K.
, Webster
, J.
, and Zedler
, S.
, 2013
, “Estimating Parameters in Physical Models Through Bayesian Inversion: A Complete Example
,” Soc. Indus. Appl. Math. Rev.
, 55
(1
), pp. 149
–167
. 31.
Aguilar
, O.
, Allmaras
, M.
, Bangerth
, W.
, and Tenorio
, L.
, 2015
, “Statistics of Parameter Estimates: a Concrete Example
,” Soc. Indus. Appl. Math. Rev.
, 57
(1
), pp. 131
–149
. 32.
Kaipio
, J.
, and Somersalo
, E.
, 2006
, Statistical and Computational Inverse Problems
, Vol. 160
, Springer
, New York
.33.
Tarantola
, A.
, 2005
, Inverse Problem Theory and Methods for Model Parameter Estimation. Society for Industrial and Applied mathematics.34.
Kennedy
, M. C.
, and O’Hagan
, A.
, 2001
, “Bayesian Calibration of Computer Models
,” J. R. Stat. Soc. Seri. B: Stat. Methodol.
, 63
(3
), pp. 425
–464
. 35.
Collis
, J.
, Connor
, A. J.
, Paczkowski
, M.
, Kannan
, P.
, Pitt-Francis
, J.
, Byrne
, H. M.
, and Hubbard
, M. E.
, 2017
, “Bayesian Calibration, Validation and Uncertainty Quantification for Predictive Modelling of Tumour Growth: A Tutorial
,” Bull. Math. Biology
, 79
(4
), pp. 939
–974
. 36.
Wu
, X.
, Kozlowski
, T.
, Meidani
, H.
, and Shirvan
, K.
, 2018
, “Inverse Uncertainty Quantification Using the Modular Bayesian Approach Based on Gaussian Process, Part 1: Theory
,” Nucl. Eng. Des.
, 335
, pp. 339
–355
. 37.
Geyer
, C. J.
, 1992
, “Practical Markov Chain Monte Carlo
,” Stat. Sci.
, 7
(4
), pp. 473
–483
. 38.
Andrieu
, C.
, Freitas
, N. D.
, Doucet
, A.
, and Jordan
, M. I.
, 2003
, “An Introduction to MCMC for Machine Learning
,” Mach. Learn.
, 50
(1–2
), pp. 5
–43
. 39.
Pelton
, A.
, DiCello
, J.
, and Miyazaki
, S.
,, 2000
, “Optimisation of Processing and Properties of Medical Grade Nitinol Wire
,” Min. Invas. Ther. Allied Tech.
, 9
(2
), pp. 107
–118
.40.
Byrd
, R. H.
, Lu
, P.
, Nocedal
, J.
, and Zhu
, C.
, 1995
, “A Limited Memory Algorithm for Bound Constrained Optimization
,” SIAM J. Sci. Comput.
, 16
(5
), pp. 1190
–1208
. 41.
McClarren
, R. G.
, 2018
, Uncertainty Quantification and Predictive Computational Science
, 1st ed., Springer
.42.
Rasmussen
, C. E.
, and Williams
, C.
, 2005
, Gaussian Processes for Machine Learning (Adaptive Computation and Machine Learning Series), 1st ed., The MIT Press.43.
Murphy
, K. P.
, 2012
, Machine Learning: A Probabilistic Perspective (Adaptive Computation and Machine Learning Series), 1st ed., The MIT Press.44.
Gelman
, A.
, Carlin
, J. B.
, Stern
, H. S.
, Dunson
, D. B.
, Vehtari
, A.
, and Rubin
, D. B.
, 2013
, Bayesian Data Analysis
, 3rd ed., CRC Press
, New York
.45.
Simpson
, D.
, Rue
, H.
, Riebler
, A.
, Martins
, T. G.
, and Sørbye
, S. H.
, 2017
, “Penalising Model Component Complexity: A Principled, Practical Approach to Constructing Priors
,” Stat. Sci.
, 32
(1
), pp. 1
–28
. 46.
Foreman-Mackey
, D.
, Hogg
, D. W.
, Lang
, D.
, and Goodman
, J.
, 2013
, “EMCEE: The MCMC Hammer
,” Publicat. Astron. Soc. Pacific
, 125
(925
), p. 306
. 47.
Au
, S. K.
, 2012
, “Connecting Bayesian and Frequentist Quantification of Parameter Uncertainty in System Identification
,” Mech. Syst. Signal. Process.
, 29
, pp. 328
–342
. 48.
Metropolis
, N.
, and Ulam
, S.
, 1949
, “The Monte Carlo Method
,” J. Am. Stat. Assoc.
, 44
(247
), pp. 335
–341
. 49.
Hastings
, W. K.
, 1970
, “Monte Carlo Sampling Methods Using Markov Chains and Their Applications”.50.
Neal
, R. M.
, 2003
, “Slice Sampling
,” Ann. Stat.
, 31
(3
), pp. 705
–767
. 51.
Hoffman
, M. D.
, and Gelman
, A.
, 2014
, “The No-U-Turn Sampler: Adaptively Setting Path Lengths in Hamiltonian Monte Carlo
,” J. Mach. Learn. Res.
, 15
(1
), pp. 1593
–1623
. https://arxiv.org/abs/1111.424652.
Hill
, T. P.
, and Miller
, J.
, 2011
, “How to Combine Independent Data Sets for the Same Quantity
,” Chaos
, 21
(3
), p. 033102
. 53.
Boyd
, J. G.
, and Lagoudas
, D. C.
, 1996
, “A Thermodynamical Constitutive Model for Shape Memory Materials. Part I. The Monolithic Shape Memory Alloy
,” Inter. J. Plast.
, 12
(6
), pp. 805
–842
. 54.
Zhang
, M.
, and Baxevanis
, T.
, 2021
, “An Extended Three-Dimensional Finite Strain Constitutive Model for Shape Memory Alloys
,” ASME J. Appl. Mech.
, 88
(11
), p. 111010
. Copyright © 2024 by ASME
You do not currently have access to this content.
