Detailed heat transfer coefficient distributions have been obtained for narrow diverging channels with and without enhancement features. The cooling configurations considered include rib turbulators and concavities (or dimples) on the main heat transfer surfaces. All the measurements are presented at a representative Reynolds number of 28,000. Pressure drop measurements for the overall channel are also presented to evaluate the heat transfer enhancement geometry with respect to pumping power requirements. The test models were studied for wall heat transfer coefficient measurements using the transient liquid crystal technique. The model wall inner surfaces were sprayed with thermochromic liquid crystals, and a transient test was used to obtain the local heat transfer coefficients from the measured color change. Analysis of results shows that choice of designs is limited by available pressure drop even if the design provides significantly higher heat transfer coefficients. Dimpled surfaces provide appreciably high heat transfer coefficients and reasonable pressure drop whereas ribbed ducts provide significantly higher heat transfer coefficients and higher overall pressure drop.
Heat Transfer Enhancement in Narrow Diverging Channels
- Views Icon Views
- Share Icon Share
- Search Site
Lamont, J, Ramesh, S, Ekkad, SV, Tolpadi, A, Kaminski, C, & Salamah, S. "Heat Transfer Enhancement in Narrow Diverging Channels." Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Volume 4: Heat Transfer, Parts A and B. Copenhagen, Denmark. June 11–15, 2012. pp. 185-191. ASME. https://doi.org/10.1115/GT2012-68486
Download citation file: