A Review of Biotransport Education in the 21st Century: Lessons Learned From Experts

[+] Author and Article Information
Rupak K. Banerjee

Department of Mechanical and Materials Engineering,
593 Rhodes Hall, ML 0072,
University of Cincinnati,
Cincinnati, OH 45221
e-mail: rupak.banerjee@uc.edu

Gavin A. D'Souza

Department of Mechanical and Materials Engineering,
University of Cincinnati,
Cincinnati, OH 45221

Christopher Rylander

Department of Mechanical Engineering,
School of Biomedical Engineering and Sciences,
Virginia Tech Blacksburg, VA 24061

Ram Devireddy

Department of Mechanical Engineering,
Louisiana State University,
Baton Rouge, LA 70803

1Corresponding author.

Manuscript received April 30, 2014; final manuscript received August 8, 2014; accepted manuscript posted August 27, 2014; published online September 19, 2014. Assoc. Editor: Kristen Billiar.

J Biomech Eng 136(11), 110401 (Sep 19, 2014) (8 pages) Paper No: BIO-14-1185; doi: 10.1115/1.4028414 History: Received April 30, 2014; Revised August 08, 2014

The field of bioengineering is relatively new and complex including multiple disciplines encompassing areas in science and engineering. Efforts including the National Science Foundation (NSF) sponsored Integrative Graduate Education and Research Traineeship (IGERT) and VaNTH Engineering Research Center in Bioengineering Educational Technologies have been made to establish and disseminate knowledge and proven methods for teaching bioengineering concepts. Further, the summer bioengineering conference (SBC), sponsored by the American Society of Mechanical Engineers' (ASME) Bioengineering Division, was established to provide a meeting place for engineering educators and students having common interests in biological systems. Of the many subdisciplines of bioengineering, biotransport is a key subject that has wide applicability to many issues in engineering, biology, medicine, pharmacology, and environmental science, among others. The absence of standard content, guidelines, and texts needed for teaching biotransport courses to students motivated the Biotransport committee of ASME's Bioengineering Division to establish a biotransport education initiative. Biotransport education workshop sessions were conducted during the SBC 2011, 2012, and 2013 as part of this initiative. The workshop sessions included presentations from experienced faculty covering a spectrum of information from general descriptions of undergraduate biotransport courses to very detailed outlines of graduate courses to successful teaching techniques. A list of texts and references available for teaching biotransport courses at undergraduate and graduate levels has been collated and documented based on the workshop presentations. Further, based on individual teaching experiences and methodologies shared by the presenters, it was noted that active learning techniques, including cooperative and collaborative learning, can be useful for teaching undergraduate courses while problem based learning (PBL) can be a beneficial method for graduate courses. The outcomes of the education initiative will help produce students who are knowledgeable in the subject of biotransport, facile in applying biotransport concepts for solving problems in various application areas, and comfortable with their own abilities as life-long learners.

Copyright © 2014 by ASME
Your Session has timed out. Please sign back in to continue.


“What is Bioengineering?”, University of California, Berkley, CA. Available at: http://bioeng.berkeley.edu/about-us/what-is-bioengineering
“VaNTH ERC in Bioengineering Educational Technologies”, Vanderbilt University, Nashville, TN. Available at: http://www.nsf.gov/pubs/2000/nsf00137/nsf00137f.htm
Davalos, R., 2012, “Multi-Scale Transport in Environmental and Physiological Systems,” Oral Presentation at the ASME Summer Bioengineering Conference, Fajardo, PR.
Truskey, G. A., 2013, “Biotransport in the Duke Bme Program,” Oral Presentation at the ASME Summer Bioengineering Conference, Sun River, OR.
Han, B., 2012, “Modified Problem-Based Teaching of Biotransport Phenomena,” Proceedings of the ASME Summer Bioengineering Conference, Fajardo, PR, June 20–23, SBC2011-53300, pp. 753–754.
Bhowmick, S., 2012, “Introductory Bioengineering at Umass Dartmouth,” ASME Summer Bioengineering Conference, Fajardo, PR, June 20–23.
Prince, M., 2010, Making the Transition to Active Learning, Bucknell University, Lewisburg, PA.
Datta, A. K., 2013, “Teaching and Learning Transport Phenomena in a Biological Engineering Curriculum,” ASME Summer Bioengineering Conference, Sun River, OR, June 26–29.
Prince, M., 2004, “Does Active Learning Work? A Review of the Research,” J. Eng. Educ., 93(3), pp. 223–231. [CrossRef]
Bransford, J., National Research Council (U.S.), Committee on Developments in the Science of Learning, and National Research Council (U.S.), Committee on Learning Research and Educational Practice, 2000, How People Learn: Brain, Mind, Experience, and School, National Academy Press, Washington, DC.
Ethier, C. R., 2013, “Biotransport Education Workshop,” ASME Summer Bioengineering Conference, Sun River, OR, June 26–29.
Zhu, L., Arola, D., Eggleton, C., and Spence, A., 2011, “Education Activities of Bioengineering for Undergraduate Students at UMBC,” Proceedings of the ASME Summer Bioengineering Conference, Farmington, PA, June 22–25, SBC2011-53149, pp. 127–128.
Pearce, J., 2011, “Biotransport Education: Thermal Therapies,” Proceedings of the ASME Summer Bioengineering Conference, Farmington, PA, June 22–25, SBC2011-53096, pp. 123–124.
Murray, H. G., 1991, Effective Teaching Behaviors in the College Classroom, Higher Education: Handbook of Theory and Research, Agathon Press, New York.
Prince, M. J., and Felder, R. M., 2006, “Inductive Teaching and Learning Methods: Definitions, Comparisons, and Research Bases,” J. Eng. Educ., 95(2), pp. 123–138. [CrossRef]
Roselli, R. J., and Diller, K. R., 2011, “A Textbook and Other Resources for Teaching Challenge-Based Biotransport,” Proceedings of the ASME Summer Bioengineering Conference, Farmington, PA, June 22–25, SBC2011-53123, pp. 125–126.
Cordray, D. S., Harris, T. R., and Klein, S., 2009, “A Research Synthesis of the Effectiveness, Replicability, and Generality of the Vanth Challenge-Based Instructional Modules in Bioengineering,” J. Eng. Educ., 98(4), pp. 335–348. [CrossRef]
Roselli, R. J., and Brophy, S. P., 2006, “Effectiveness of Challenge-Based Instruction in Biomechanics,” J. Eng. Educ., 95(4), pp. 311–324. [CrossRef]
Martin, T., Rivale, S. D., and Diller, K. R., 2007, “Comparison of Student Learning in Challenge-Based and Traditional Instruction in Biomedical Engineering,” Ann. Biomed. Eng., 35(8), pp. 1312–1323. [CrossRef]
Oakley, B., Felder, R., Brent, R., and Elhajj, I., 2004, “Turning Student Groups Into Effective Teams,” J. Stud. Centered Learn., 2(1), pp. 9–34.
Johnson, M., and Ethier, C. R., 2014, Problems for Biomedical Fluid Mechanics and Transport Phenomena, Cambridge Texts in Biomedical Engineering, Cambridge University, Cambridge, UK.
Roselli, R. J., and Diller, K. R., 2011, Biotransport: Principles and Applications, Springer, NY.
Datta, A. K., and Rakesh, V., 2010, An Introduction to Modeling of Transport Processes: Applications to Biomedical Systems, Cambridge Texts in Biomedical Engineering, Cambridge University, Cambridge, UK.
Truskey, G. A., Yuan, F., and Katz, D. F., 2009, Transport Phenomena in Biological Systems, Pearson Prentice Hall Bioengineering, Pearson Prentice Hall, Upper Saddle River, NJ.
Datta, A. K., 2002, Biological and Bioenvironmental Heat and Mass Transfer, Marcel Dekker, NY.
American Society of Mechanical Engineers. Heat Transfer Division, 1968, Thermal Problems in Biotechnology. Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, American Society of Mechanical Engineers, NY. [PubMed] [PubMed]
Enderle, J. D., and Bronzino, J. D., 2012, Introduction to Biomedical Engineering, Elsevier/Academic, Amsterdam, Boiston.
Fournier, R. L., 2012, Basic Transport Phenomena in Biomedical Engineering, CRC, Boca Raton, FL.
Gautheire, M., ed., 1990, Thermal Dosimetry and Treatment Planning (Clinical Thermology Series), Springer, Berlin, Germany.
Yang, W.-J., 1989, Biothermal-Fluid Sciences: Principles and Applications, Hemisphere Pub. Corp., NY.
Shitzer, A., and Eberhart, R. C., 1985, Heat Transfer in Medicine and Biology: Analysis and Applications, Plenum, NY.
Cooney, D. O., 1976, Biomedical Engineering Principles: An Introduction to Fluid, Heat, and Mass Transport Processes, Biomedical Engineering and Instrumentation Series V 2, Marcel Dekker, NY.
Lightfoot, E. N., 1973, Transport Phenomena and Living Systems; Biomedical Aspects of Momentum and Mass Transport, Wiley, NY.
Seagrave, R. C., 1971, Biomedical Applications of Heat and Mass Transfer, Iowa State University Press, Ames, IA.
Sparrow, E. M., Cho, Y. I., Abraham, J. P., and Gorman, J. M., 2013, Advances in Heat Transfer, Elsevier, Waltham, MA.
Chandran, K. B., Yoganathan, A. P., and Rittgers, S. E., 2012, Biofluid Mechanics: The Human Circulation, Taylor & Francis, Boca Raton, FL.
Kundu, P. K., Cohen, I. M., and Dowling, D. R., 2012, Fluid Mechanics, Academic, Waltham, MA.
Deen, W. M., 2012, Analysis of Transport Phenomena, Topics in Chemical Engineering, Oxford University, NY.
ÇEngel, Y. A., and Boles, M. A., 2011, Thermodynamics: An Engineering Approach, McGraw-Hill, NY.
Kutz, M., 2009, Biomedical Engineering and Design Handbook, McGraw-Hill, NY.
Friedman, M. H., 2008, Principles and Models of Biological Transport, Springer, NY.
Temenoff, J. S., and Mikos, A. G., 2008, Biomaterials: The Intersection of Biology and Materials Science, Pearson Prentice Hall Bioengineering, Pearson/Prentice Hall, Upper Saddle River, NJ.
Grimmes, S., and Martinsen, O. G., 2008, Bioimpedance and Bioelectricity, Academic, Waltham, MA.
Incropera, F. P., and Incropera, F. P., 2007, Fundamentals of Heat and Mass Transfer, Wiley, Hoboken, NJ.
Kleinstreuer, C., 2006, Biofluid Dynamics: Principles and Selected Applications, CRC/Taylor & Francis, Boca Raton, FL.
Taber, L. A., 2004, Nonlinear Theory of Elasticity: Applications in Biomechanics, World Scientific, River Edge, NJ.
Park, J. B., and Bronzino, J. D., 2002, Biomaterials: Principles and Applications, CRC, Boca Raton, FL.
Kreith, F., 2000, The CRC Handbook of Thermal Engineering, The Mechanical Engineering Handbook Series, CRC, Boca Raton, FL.
Fung, Y. C., 1997, Biomechanics: Circulation, Springer, NY.
Berger, S. A., Goldsmith, W., and Lewis, E. R., 1996, Introduction to Bioengineering, Oxford University, Oxford, NY.
Welch, A. J., and Gemert, M. J. C. V., 1995, Optical-Thermal Response of Laser-Irradiated Tissue, Lasers, Photonics, and Electro-Optics, Plenum, NY.
Fung, Y. C., 1993, Biomechanics: Mechanical Properties of Living Tissues, Springer-Verlag, NY.
Mazumdar, J., 1992, Biofluid Mechanics, World Scientific, Singapore.
American Society of Mechanical Engineers, Winter Meeting (1988: Chicago IL), Mcgrath, J. J., Diller, K. R., American Society of Mechanical Engineers, Bioengineering Division and American Society of Mechanical Engineers, Heat Transfer Division, 1988, Low Temperature Biotechnology: Emerging Applications and Engineering Contributions, BED, ASME, NY.
Pedley, T. J., 1980, The Fluid Mechanics of Large Blood Vessels, Cambridge Monographs on Mechanics and Applied Mathematics, Cambridge University, Cambridge, UK.
Charm, S. E., and Kurland, G. S., 1974, Blood Flow and Microcirculation, A Wiley-Bio-Medical Health Publication, Wiley, NY.
Middleman, S., 1972, Transport Phenomena in the Cardiovascular System, Wiley Interscience Series on Biomedical Engineering, Wiley-Interscience, NY.


Grahic Jump Location
Fig. 1

A schematic showing core (ring 1) and overlapping (ring 2) courses along with application areas (ring 3) in the biotransport major (the detailed application areas are enlisted in row 3 of Table 1)



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In