TECHNICAL PAPERS: Fluids/Heat/Transport

3-D Finite-Element Models of Human and Monkey Fingertips to Investigate the Mechanics of Tactile Sense

[+] Author and Article Information
Kiran Dandekar, Balasundar I. Raju, Mandayam A. Srinivasan

The Touch Lab Department of Mechanical Engineering, and The Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA 02139

J Biomech Eng 125(5), 682-691 (Oct 09, 2003) (10 pages) doi:10.1115/1.1613673 History: Received July 11, 2002; Revised April 28, 2003; Online October 09, 2003
Copyright © 2003 by ASME
Your Session has timed out. Please sign back in to continue.


Lanir, Y., 1987, “Skin Mechanics,” In: Handbook of Bioengineering, McGraw-Hill, New York.
Srinivasan,  M. A., and Dandekar,  K., 1996, “An Investigation of the Mechanics of Tactile Sense Using Two-Dimensional Models of the Primate Fingertip,” J. Biomech. Eng., 118, pp. 48–55.
Srinivasan,  M. A., 1989, “Surface Deflection of Primate Fingertip Under Line Load,” J. Biomech., 22, pp. 343–349.
Phillips,  J. R., and Johnson,  K. O., 1981, “Tactile Spatial Resolution. II. Neural Representation of Bars, Edges, and Gratings in Monkey Primary Afferents,” J. Neurophysiol., 46, pp. 1192–1203.
Phillips,  J. R., and Johnson,  K. O., 1981, “Tactile Spatial Resolution. III. A Continuum Mechanics Model of Skin Predicting Mechanoreceptor Responses to Bars, Edges, and Gratings,” J. Neurophysiol., 46, pp. 1204–1225.
Serina,  E. R., Mockenstrum,  E., Mote,  C. D., and Rempel,  D., 1998, “A Structural Model of the Forced Compression of the Fingertip Pulp,” J. Biomech., 31, pp. 639–646.
Serina,  E. R., Mote,  C. D., and Rempel,  D., 1997, “Force Response of the Fingertip Pulp to Repeated Compression—Effects of Loading Rate, Loading Angle and Anthropometry,” J. Biomech., 30, pp. 1035–1040.
Maeno,  T., Kobayashi,  K., and Yamazaki,  N., 1998, “Relationship Between the Structure of Human Finger Tissue and the Location of Tactile Receptors,” JSME Int. J., 41, pp. 94–100.
Maeno, T., and Kobayashi, K., 1998, “FE Analysis of the Dynamic Characteristics of the Human Finger Pad With Objects With/Without Surface Roughness,” Proceedings of the ASME Dynamic Systems and Control Division, DSC-64 , pp. 279–286.
Pawluk,  D. T. V., and Howe,  R. D., 1999, “Dynamic Lumped Element Response of the Human Fingerpad,” J. Biomech. Eng., 121, pp. 178–183.
Srinivasan,  M. A., and LaMotte,  R. H., 1987, “Tactile Discrimination of Shape: Responses of Slowly and Rapidly Adapting Mechanoreceptive Afferents to a Step Indented Into the Monkey Fingerpad,” J. Neurosci., 7, pp. 1682–1697.
North,  J. F., and Gibson,  F., 1978, “Volume Compressibility of Human Abdominal Skin,” J. Biomech., 11, pp. 203–207.
Vossoughi,  J., and Vaishnav,  R. N., 1979, “Comments on the Paper ‘Volume Compressibility of Human Abdominal Skin,’” J. Biomech., 12, p. 481.
Srinivasan,  M. A., Gulati,  R. J., and Dandekar,  K., 1992, “In Vivo Compressibility of the Human Fingertip,” Adv. Bioeng., 22, pp. 573–576.
Tregear, R. T., 1966, Physical Functions of Skin, Academic Press, New York, NY.
Gulati, R. J., and Srinivasan, M. A., 1997, Determination of Mechanical Properties of the Human Fingerpad in Vivo Using a Tactile Stimulator, MIT, Research Laboratory of Electronics Technical Report No. 605.
Lanir,  Y., and Fung,  Y. C., 1974, “Two-Dimensional Mechanical Properties of Rabbit Skin-II. Experimental Results,” J. Biomech., 7, pp. 171–182.
Fung, Y. C., 1993, Biomechanics: Mechanical Properties of Living Tissues, Springer-Verlag, New York, NY.
Daly,  C. H., 1982, “Biomechanical Properties of Dermis,” J. Invest. Dermatol., 79, pp. 17s–20s.
Pawluk,  D. T. V., and Howe,  R. D., 1999, “Dynamic Contact of the Human Fingerpad Against a Flat Surface,” J. Biomech. Eng., 121, pp. 605–611.
Srinivasan, M. A., and LaMotte, R. H., 1991, Encoding of Shape in the Responses of Cutaneous Mechanoreceptors, In: Information Processing in the Somatosensory System, Eds: O. Franzen and J. Westman, Wenner-Gren International Symposium Series, MacMillan Press.
Grahame,  R., 1968, “Elasticity of Human Skin in Vivo,” Ann. Phys. Med., 10, pp. 130–136.
Veronda,  D. R., and Westmann,  R. A., 1970, “Mechanical Characterization of Skin-Finite Deformations,” J. Biomech., 3, pp. 111–124.
Manschot,  J. F. M., and Brakkee,  A. J. M., 1986, “The Measurement and Modelling of the Mechanical Properties of Human Skin In Vivo—I. The Measurement,” J. Biomech., 19, pp. 511–515.
Oxlund,  H., Manschot,  J., and Viidik,  A., 1988, “The Role of Elastin in the Mechanical Properties of Skin,” J. Biomech., 21, pp. 213–218.
Pan,  L., Zan,  L., and Foster,  S., 1997, “In Vivo High-Frequency Ultrasound Assessment of Skin Elasticity,” Proc.-IEEE Ultrason. Symp., 2, pp. 1087–1091.


Grahic Jump Location
The algorithm for reconstruction of the 3-D fingertip. Four extracted fingertip boundaries at 0, 45, 90, and 120 deg are shown on the left. An axial cross-section reconstructed from the extracted borders is shown in the middle. As shown on the right, the set of all such cross-sections define the external geometry of the monkey fingertip and a solid can be generated by generating a patch over the axial cross-sections.
Grahic Jump Location
3-D view of the monkey (top) and human (bottom) fingertip meshes along with the nail. The hidden lines are removed for clarity. The scale is not the same for the two fingertips (monkey fingertip width ∼8–10 mm; human fingertip width ∼16–20 mm).
Grahic Jump Location
Three slices of the monkey fingertip model are shown. The elements are shaded to show the five layers used in the model.
Grahic Jump Location
Deformed meshes of the monkey (top) and human (bottom) fingertips indented by a sharp wedge aligned perpendicular to the axis of the finger. The wedge was indented into the fingertip up to a depth of 2.0 mm in increments of 0.5 mm. The contours of constant vertical displacement (in steps of 0.2 mm) of the fingertips under 2 mm indentation by the line load are shown.
Grahic Jump Location
Surface deformation predicted by the homogeneous monkey (top) and human (bottom) fingertip models are compared with the experimental data from Srinivasan 3. The element size for the monkey and human models were approximately 0.4 and 0.8 mm, respectively. Vertical displacements plotted for two depths of indentations of 1 mm and 2 mm show that homogeneous models do not accurately model the biomechanical behavior of the fingertips.
Grahic Jump Location
Effect of layer stiffness on the surface deformation. The elastic modulus of the bone was held constant at 108 and the elastic moduli of other layers were varied successively by a factor of 10. The predicted vertical displacement is compared with the experimentally observed data for a monkey fingertip indented to a depth of 2.0 mm.
Grahic Jump Location
Surface deformation of the monkey fingertip under line loads predicted by the finite-element model and comparison with observed surface profile data for four monkey fingertips, each indented to 4 different depths (0.5 mm to 2.0 mm at 0.5 mm steps). The empirical data from Srinivasan 3 are shown with crosses and the finite-element predictions are shown by solid lines. For each monkey fingertip, the material model used in the finite-element models is listed on the top of the plot.
Grahic Jump Location
Surface deformation of the human fingertip under line loads predicted by the finite-element model. The empirical data shown with crosses for three human subjects is from Srinivasan 3. Same format as Fig. 9.
Grahic Jump Location
Neural response of an SA-I afferent to indentation by a 3 mm-wide rectangular bar predicted by the high-resolution monkey fingertip model based on four candidate mechanical quantities: strain energy density, maximum compressive strain, mean normal stress, and vertical compressive stress. The quantities were computed for both the layered and the homogeneous models. The x axis is the location of the center of the bar as it was indented at various locations on the fingerpad. The numbers above each panel indicate the correlation coefficient between the recorded neural response and the predicted response for each mechanical quantity for the layered (“lay”) and homogeneous (“hom”) models. The layered model was able to model the neural response better than the homogeneous model for all the four quantities. Strain energy density was able to predict the neural response better than the other quantities.
Grahic Jump Location
The variation in contact area and maximum contact pressure for constant force of indentation of step 5 at various locations on the monkey fingertip model
Grahic Jump Location
Neural response of SA-I afferent to indentation by step shapes predicted by the monkey fingertip model. Strain energy density computed at a typical receptor location (0.75 mm below the skin surface) is matched with spatial response profiles recorded previously by Srinivasan and LaMotte 11. Good fits between the predicted and measured data (same scaling and threshold values for all the three step shapes) indicate that strain energy density is a good candidate be the relevant stimulus for SA-I mechanoreceptors.
Grahic Jump Location
Experimental setup used for extracting borders from the epoxy replicas of monkey and human fingertips
Grahic Jump Location
Extraction of the fingertip boundary from images of the fingertip replicas. The raw image shown in the left panel is the image as acquired by the frame grabber. The 2-D histogram is shown in the middle panel and shows a clear distinction between the gray-scale values of the fingertip and the background. The extracted border is shown in the right panel.



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In