Design Optimization of Cementless Femoral Hip Prostheses Using Finite Element Analysis

[+] Author and Article Information
Piotr Kowalczyk

Institute of Fundamental Technological Research, Polish Academy of Sciences, Świętokrzyska 21, 00-049 Warszawa, Polande-mail: pkowalcz@ippt.gov.pl

J Biomech Eng 123(5), 396-402 (Apr 17, 2001) (7 pages) doi:10.1115/1.1392311 History: Received February 13, 2000; Revised April 17, 2001
Copyright © 2001 by ASME
Your Session has timed out. Please sign back in to continue.


Raut,  V. V., Siney,  P. D., and Wroblewski,  B. M., 1995, “Revision for Aseptic Stem Loosening Using the Cemented Charnley Prosthesis,” J. Bone Joint Surg. Br., 77-B, pp. 23–27.
Raut,  V. V., Siney,  P. D., and Wroblewski,  B. M., 1995, “Cemented Revision for Aseptic Acetabular Loosening,” J. Bone Joint Surg. Br., 77-B, pp 357–361.
Malchau,  H., Herberts,  P., and Ahnfelt,  L., 1993, “Prognosis of Total Hip Replacement in Sweden. Follow-up of 92675 Operations Performed 1978–1990,” Acta Orthop. Scand., 64, pp. 497–506.
Huiskes, R., and Verdonschot, N., 1997, “Biomechanics of Artificial Joints: The Hip,” in: V. C. Mow and W. C. Hayes, eds., Basic Orthopaedic Biomechanics, 2nd ed., Lippincott-Raven, Philadelphia, pp. 395–460.
Huiskes,  R., Weinans,  H., and van Rietbergen,  B., 1992, “The Relationship Between Stress Shielding and Bone Resorption Around Total Hip Stems and the Effects of Flexible Materials,” Clin. Orthop. Relat. Res., 274, pp. 124–134.
Cristofolini,  L., 1997, “A Critical Analysis of Stress-Shielding Evaluation of Hip Prostheses,” Crit. Rev. Biomed. Eng., 25, pp. 409–483.
Zienkiewicz, O. C., 1977, The Finite Element Method, McGraw-Hill, New York.
Prendergast,  P. J., 1997, “Finite Element Models in Tissue Mechanics and Orthopaedic Implant Design,” Clin. Biomech. (Los Angel. Calif.), 12, pp. 343–366.
Yang,  R. J., Choi,  K. K., Crowinshield,  R. D., and Brand,  R. A., 1984, “Design Sensitivity Analysis: A New Method for Implant Design and a Comparison With Parametric Finite Element Analysis,” J. Biomech., 17, pp. 849–854.
Huiskes,  R., and Boeklagen,  R., 1989, “Mathematical Shape Optimization of Hip Prosthesis Design,” J. Biomech., 22, pp. 793–804.
Hedia,  H. S., Barton,  D. C., Fisher,  J., and Ibrahim,  A., 1996, “Shape Optimisation of a Charnley Prosthesis Based on the Fatigue Notch Factor,” Biomed. Mater. Eng., 6, pp. 199–217.
Hedia,  H. S., Barton,  D. C., and Fisher,  J., 1997, “Material Optimisation of the Femoral Component of a Hip Prosthesis Based on the Fatigue Notch Factor Approach,” Biomed. Mater. Eng., 7, pp. 83–98.
Kuiper,  J. H., and Huiskes,  R., 1997, “Mathematical Optimization of Elastic Properties: Application to Cementless Hip Stem Design,” ASME J. Biomech. Eng., 119, pp. 166–174.
Chang,  P. B., Williams,  B. J., Santner,  T. J., Notz,  W. I., and Bartel,  D. L., 1999, “Robust Optimization of Total Joint Replacements Incorporating Environmental Variables,” ASME J. Biomech. Eng., 121, pp. 304–310.
Martin, R. B., Burr, D. B., and Sharkey, N. A. 1988, Skeletal Tissue Mechanics, Springer, New York.
Martens,  M., Van Audekercke,  R., Delport,  P., De Meester,  P., and Mulier,  J. C., 1983, “The Mechanical Characteristics of Cancellous Bone at the Upper Femoral Region,” J. Biomech., 16, pp. 971–983.
Hobatho, M.-C., Rho, J. Y., and Ashman, R. B., 1997, “Anatomical Variation of Human Cancellous Bone Mechanical Properties in Vitro,” in: G. Lowet et al., eds., Bone Research in Biomechanics, IOS Press.
Rice,  J. C., Cowin,  S. C., and Bowman,  J. A., 1988, “On the Dependence of the Elasticity and Strength of Cancellous Bone on Apparent Density,” J. Biomech., 21, pp. 155–168.
Tokarzewski,  S., Telega,  J. J., and Gal̸ka,  A., 1999, “A Contribution to Evaluation of Effective Moduli of Trabecular Bone With Rod-like Microstructure,” J. Theor. Appl. Mech., 37, pp. 707–728.
Carter,  D. R., and Hayes,  W. C., 1977, “The Compressive Behavior of Bone as a Two-Phase Porous Structure,” J. Bone Jt. Surg., Am. Vol., 59A, pp. 954–962.
Turner,  C. H., Rho,  J., Takano,  Y., Tsui,  T. Y., and Pharr,  G. M., 1999, “The Elastic Properties of Trabecular and Cortical Bone Tissues are Similar: Results From Two Microscopic Measurement Techniques,” J. Biomech., 32, pp. 437–441.
Carter,  D. R., Orr,  T. E., and Fyhrie,  D. P., 1989, “Relationships Between Loading History and Femoral Cancellous Bone Architecture,” J. Biomech., 22, pp. 231–244.
Pilliar,  R. M., Lee,  J. M., and Maniatopoulos,  C., 1986, “Observation on the Effect of Movement on Bone Ingrowth Into Porous-Surfaced Implants,” Clin. Orthop. Relat. Res., 208, pp. 108–113.
Rohlmann,  A., Cheal,  E. J., Hayes,  W. C., and Bergmann,  G., 1988, “A Nonlinear Finite Element Analysis of Interface Conditions in Porous Coated Hip Endoprostheses,” J. Biomech., 21, pp. 605–611.
Kowalczyk,  P., 1994, “Finite-Deformation Interface Formulation for Frictionless Contact Problems,” Commun. Num. Meth. Eng., 10, pp. 879–893.
Kleiber, M., Antúnez, H., Hien, T. D., and Kowalczyk, P., 1997, Parameter Sensitivity in Nonlinear Mechanics, Wiley, Chichester.
Schittkowski,  K., 1986, “NLQPL: A Fortran Subroutine Solving Constrained Nonlinear Programming Problems,” Ann. Operat. Res., 5, pp. 485–500.
Culleton,  T. P., Prendergast,  P. J., and Taylor,  D., 1993, “Fatigue Failure in the Cement Mantle of an Artificial Joint,” Clin. Mat., 12, pp. 95–102.


Grahic Jump Location
Tangential stress distribution in bone along its internal surface on the lateral (left) and medial (right) side, for the initial implant design
Grahic Jump Location
Tangential stress sensitivity distribution in bone along its internal surface on the lateral (left) and medial (right) side, for the initial implant design (as the design parameters are dimensionless, sensitivity has the stress units)
Grahic Jump Location
Optimum tangential stress distribution in bone along its internal surface on the lateral (left) and medial (right) side, for the case with two design parameters
Grahic Jump Location
Optimum tangential stress distribution in bone along its internal surface on the lateral (left) and medial (right) side, for the case with four design parameters
Grahic Jump Location
Computation scheme in the optimization routine
Grahic Jump Location
Physical model: Dashed lines denote the winglet base line and the limit of the proximal porous coated area on the implant surface
Grahic Jump Location
Definition of dimensionless design parameters



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In