Design and Validation of a Machine for Reproducible Precision Insertion of Femoral Hip Prostheses for Preclinical Testing

[+] Author and Article Information
S. A. Maher, P. J. Prendergast, A. J. Reid, D. V. Waide

Department of Mechanical and Manufacturing Engineering, Trinity College, Dublin 2, Ireland

A. Toni

Laboratorio di Tecnologia Medica, Istituti Ortopedici Rizzoli, Via di Barbiano 1/10, 40136 Bologna, Italy

J Biomech Eng 122(2), 203-207 (Nov 30, 1999) (5 pages) doi:10.1115/1.429645 History: Received March 17, 1999; Revised November 30, 1999
Copyright © 2000 by ASME
Your Session has timed out. Please sign back in to continue.


Niederer,  P. G., Chiquet,  C., Frey,  O., and Semlitsch,  M., 1978, “Artificial Proximal Femur of Fiber Reinforced Polyester for the Study of Load Transmission of Cemented Hip Prostheses: the Prosthesis Cement Interface,” Biomaterials, 1, pp. 88–89.
Szivek,  J. A., and Gealer,  R. L., 1991, “Comparison of the Deformation Response of Synthetic and Cadaveric Femora During Simulated One-Legged Stance,” J. Appl. Bio., 2, pp. 277–280.
Andriacchi,  T. P., Galante,  J. O., Belytschko,  T. B., and Hampton,  S., 1976, “A Stress Analysis of the Femoral Stem in Total Hip Prostheses,” J. Bone Jt. Surg., 58-A, No. 5, pp. 618–624.
Star,  M. J., Colwell,  C. W., Kelman,  G. J., Ballock,  R. T., and Walker,  R. H., 1994, “Suboptimal (Thin) Distal Cement Mantle Thickness as a Contributory Factor in Total Hip Arthroplasty Femoral Component Failure,” J. Arthrop., 9, No. 2, pp. 143–149.
Askew,  M. J., Steege,  J. W., Lewis,  J. L., Ranieri,  J. R., and Wixson,  R. L., 1984, “Effect of Cement Pressure and Bone Strength on Polymethylmethacrylate Fixation,” J. Orthop. Res., 1, No. 4, pp. 412–420.
Mulroy,  R. D., and Harris,  W. H., 1990, “The Effect of Improved Cementing Techniques on Component Loosening in Total Hip Replacement,” J. Bone Jt. Surg., 72-B, pp. 757–760.
Paul,  H. A., Bargar,  W. L., Mittlestadt,  B., Musits,  B., Taylor,  R. H., Kazanzides,  P., Zuhars,  J., Williamson,  B., and Hanson,  W., 1992, “Development of a Surgical Robot for Cementless Total Hip Arthroplasty,” Clin. Orthop. Relat. Res., 285, pp. 57–66.
Bargar,  W. L., Bauer,  A., and Borner,  M., 1998, “Primary and Revision Total Hip Replacement Using the Robodoc® System,” Clin. Orthop. Relat. Res., 354, pp. 82–91.
Markolf,  K. L., and Amstutz,  H. C., 1976, “In Vitro Measurement of Bone-Acrylic Interface Pressure During Femoral Component Insertion,” Clin. Orthop. Relat. Res., 121, pp. 60–66.
Schmidt,  J., Steur,  G., Specht,  R., and Kumm,  D., 1994, “Computer-Controlled Experimental Implantation Technique Comparing the Quality of Different Types of Cement Application Into the Femoral Canal in Cemented Hip Arthroplasty,” Biomed. Tec., 39(4), pp. 79–84.
Middleton,  R. J., Howie,  D. W., Costi,  K., and Sharpe,  P., 1998, “Effects of Design Changes on Cemented Tapered Femoral Stem Fixation,” Clin. Orthop. Relat. Res., 355, pp. 47–56.
Berzins,  A., Sumner,  D. R., Andriacchi,  T. P., and Galante,  J. O., 1993, “Stem Curvature and Load Angle Influence the Initial Relative Bone-Implant Motion of Cementless Femoral Stems,” J. Orthop. Res., 11, No. 5, pp. 758–769.
Burke,  D. W., O’Connor,  D., Zalenski,  E. B., Jasty,  M., and Harris,  W. H., 1991, “Micromotion of Cemented and Uncemented Femoral Components,” J. Bone Jt. Surg., 73-B, pp. 33–37.
Schneider,  E., Eulenberger,  J., Steiner,  W., Wyder,  D., Friedman,  R. J., and Perren,  S. M., 1989, “Experimental Method for the In Vitro Testing of the Initial Stability of Cementless Hip Prostheses,” J. Biomech., 22, pp. 735–744.
Kiss,  J., Murray,  D. W., Turner-Smith,  A. R., and Bulstrode,  C. J., 1995, “Roentgen Stereophotogrammetric Analysis for Assessing Migration of Total Hip Replacement Femoral Components,” J. Eng. Med., 209, pp. 169–175.
International Standards Organisation, 1988, “Implants for Surgery—Partial and Total Hip Joint Prostheses—Part 3: Determination of Endurance Properties of Stemmed Femoral Components Without Application of Torsion,” ISO 7206—3: (E).
Maher, S. A., Prendergast, P. J., Waide, D. V., Reid, A. J., and Lyons, G. C., 1999, “Development of an Experimental Procedure for Pre-Clinical Testing of Cemented Hip Replacements,” Joint Replacement and Interface Mechanics—II, ASME BED-Vol. 43, pp. 139–140.


Grahic Jump Location
Three stages during an animation of an insertion of a femoral prosthesis into a composite femur. Throughout insertion, contact between the prosthesis and the inner cortical wall is avoided. The animated insertion can be seen on http://www.mme.tcd.ie/Groups/Bioengineering/insertion.html.
Grahic Jump Location
Two points (points A and B) are linked to the prosthesis profile. They plot two trajectories as the prosthesis follows the specified insertion path. The two trajectories are exported to a drawing package, where they are offset (illustrated as a thickened line) to compensate for the diameter of the rollers that will follow the profiled plate. The trajectories are joined together to produce a closed profile. The profile is programmed to a CNC milling machine, and the profile is machined from mild steel plate, producing a cam.
Grahic Jump Location
An assembly drawing of the femoral insertion machine. Two rollers (A and B) are seated on the cam. They are connected via cheek plates to produce a carriage. The machine is of mild steel box section construct, with a wide base for good stability. The fixtures are detachable and adjustable so that the insertion of different prosthesis geometries is possible.
Grahic Jump Location
The prosthesis is located relative to a fixed reference, called an alignment femur, prior to insertion. The schematic shown illustrates the methodology behind locating two fixed points relative to the alignment femur in the coronal and sagittal planes. The positions of two fixed points on the prosthesis are determined from the animation software. Micrometer heads push against the surface of the prosthesis, so that the lower fixed point on the prosthesis is pushed into its predetermined position, and locked in place. The upper point is then pushed into position, so that the prosthesis can rotate about its lower fixed point. The micrometer heads act through slots that have been milled through the faces of the femur.
Grahic Jump Location
Diagram indicating the procedure followed to quantify the reproducibility and the accuracy of insertions, in the coronal plane. Two lines are drawn on the prosthesis. One at a height of 10 mm from the tip of the prosthesis and one at a height of 80 mm from the tip of the prosthesis (following recommendations for prosthesis alignment in ISO 7206-3 16). At 20 mm increments on lines drawn perpendicular to the reference line, the distance between the prosthesis surface and the outer cortical bone is measured on the radiographs and in the animation. A similar procedure is followed in the sagittal plane.



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In