0
RESEARCH PAPERS

Kinematic Analysis and Simulation of Vertebral Motion Under Static Load—Part I: Kinematic Analysis

[+] Author and Article Information
A. H. Soni

Oklahoma State University, Stillwater, Okla. 74074

J. A. Sullivan

Health Sciences Center, Oklahoma City, Okla. 73190

A. G. Patwardhan, M. R. Gudavalli, J. Chitwood

School of Veterinary Medicine, Oklahoma State University, Stillwater, Okla. 74074

J Biomech Eng 104(2), 105-111 (May 01, 1982) (7 pages) doi:10.1115/1.3138322 History: Received June 25, 1980; Revised November 30, 1981; Online June 15, 2009

Abstract

The paper presents the kinematic analysis of motion segments of ten, human-lumbar spines. In order to achieve this objective, a spine fixture and a linkage transducer were designed. The spine fixture is capable of holding the motion segment in a prescribed plane of loading. With the designed fixture it becomes possible to apply three types of shear loads, and three types of bending loads. In addition, if desired, a compressive preload may be applied to a motion segment. The linkage transducer consists of six rotary potentiometers connected by seven rigid links. The transducer is capable of measuring all possible components of vertebral motion. The motion data in the motion segments of ten lumbar spine were collected under the influence of combined shear and bending loads applied in an incremental manner. Maximum shear load was 35.6 N and maximum bending load was 6780 N·mm. The motion segments did not show any appreciable difference in their motion beyond these loads. The motion segments were not subjected to any compressive preload. The range of motion data were collected in twelve loading planes 15 deg apart. The characteristic vertebral motion may be described in terms of range of motion, its components, and the parameters associated with the screw motion. The paper presents data in the chart form to describe the kinematic characteristics of the lumbar motion segment.

Copyright © 1982 by ASME
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In