Why Sliding Seats and Short Stroke Intervals are Used for Racing Shells

[+] Author and Article Information
M. Senator

Summit, N.J. 07091

J Biomech Eng 103(3), 151-159 (Aug 01, 1981) (9 pages) doi:10.1115/1.3138271 History: Received January 09, 1980; Revised March 27, 1981; Online June 15, 2009


A theory is developed to explain why racing shell crews use sliding seats and shorter-than-necessary stroke intervals, two features that tend to waste energy in a highly competitive, power-limited situation. The theory shows that sliding seats are used because they allow the crew to move the oar blades fast enough during the stroke to transfer all available power to the water. Shorter-than-necessary stroke intervals are used to minimize the sum of the power dissipated in developing thrust, which decreases with the relative length of the stroke interval, and the power dissipated in hull drag due to fluctuations about average velocity, which increases with the relative length of the stroke interval. Using representative dimensions and masses, a typical value of average velocity for a race, and independently estimated values of drag and thrust coefficients, the theory predicts an optimum stroke fraction of 0.400, an optimum stroke rate of 45 per min, and an accountable power of 0.46 hp/man for an eight-oar racing shell, values that agree remarkably well with those used under competitive racing conditions. The theory indicates that using wider-bladed oars might improve performance; the theory also supports a suggestion made to the writer by R. A. Swanson that crossing the oars over the shell would improve performance.

Copyright © 1981 by ASME
Your Session has timed out. Please sign back in to continue.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In